Wireless MCUのトピックRe: How to send UModulation siganl by HCI cmd

How to send UModulation siganl by HCI cmd

Annie_he — Fri, 26 Apr 2024 05:54:59 GMT

Hi,

If there is any SDK example can support to control KW45 Bluetooth board to send unmodulation signal by HCI cmd? If not, How can we change the code and support it?

Our surrounding:

IDE version: MCUXpresso IDE v11.8.0_1165

SDK version: KW45B41Z83 V2.12.7

FW: HCI_black_box

hope your support, thanks.

Best Regards,

Annie

Re: How to send UModulation siganl by HCI cmd

Christine_Li — Fri, 26 Apr 2024 10:05:29 GMT

Hi, @Annie_he

Thanks for creating case to us and hope you are doing well.

I will check it and reply to you once have any updates.

Have a nice weekend.

Best regards,

Christine.

Re: How to send UModulation siganl by HCI cmd

Christine_Li — Sun, 28 Apr 2024 09:40:40 GMT

Hi， @Annie_he

As my understanding, the modulation and demodulation is implemented by physical layer, not by HCI layer.

HCI layer is only a middle layer to transfer commands from host to controller and transfer events from controller to host, or transfer data from both side. It means, for HCI layer, there is no relationship with modulation or demodulation.

Can you please let me know why do you need this kind of HCI cmd to send UModulation siganl? Or provide me more details about your using cases?

Best regards,

Christine.

Re: How to send UModulation siganl by HCI cmd

Annie_he — Mon, 29 Apr 2024 00:44:09 GMT

Hi Christine,

In another post, I also send a post and your have replied me. I think we can discuss more detail in that post, I will click this post have been solved, Thanks.

Post link: https://community.nxp.com/t5/Wireless-Connectivity/What-difference-between-Connectivty-test-and-HCI-black-box-FW/m-p/1856276#M17227

Best Regards,

Annie