topic Re: BeyondStudio Eclipse Rtos in Wireless MCU

BeyondStudio Eclipse Rtos

Larz — Tue, 19 Mar 2024 07:25:46 GMT

Goodday,

I'm using BeyondStudio. After a fresh install, I had some issues with installing the ZBPro ZigBee Plug-ins. Especially the plugin Jennic RTOS Configuration Editor.

Turns out that Eclipse does not support this plugin anymore.

But I stil work on "older" MCU's such as the JN5169 with for example the JN-AN-1218 Application Note?

Can the latest plugin be downloaded somewhere, or does somebody has the latest plugin?

Re: BeyondStudio Eclipse Rtos

Ricardo_Zamora — Tue, 19 Mar 2024 17:12:56 GMT

Hello,

Could you please help me checking this community document? Beyond Studio Common Errors - NXP Community

The JN5169 has no software releases planned, so we highly recommend moving to the JN5189 Wireless MCU for Zigbee® and Thread, as is our focus part for ZigBee/Thread. It is supported by our MCUXpresso IDE and MCUXpresso SDK. There are several SDK examples, like driver examples (GPIO, UART, SPI, I2C), RTOS examples, and Wireless examples (ZigBee and Thread).

Regards,

Ricardo

Re: BeyondStudio Eclipse Rtos

Larz — Tue, 19 Mar 2024 18:27:33 GMT

@Ricardo_Zamora Thank you for your reply.

In the post you see what your collegue says about the Zigbee plugins:

So Do you have a zip-file with the latest plugins so that my beyondstudio will work?

Best regards,

Larz

Re: BeyondStudio Eclipse Rtos

Ricardo_Zamora — Wed, 20 Mar 2024 16:36:15 GMT

Hello Larz,

Unfortunately, some plugins are no longer available.

I apologize for the inconveniences.

Regards,

Ricardo