topic Re: JN-AN-1189-ZigBee-HA-Demo will not compile in Wireless MCU

JN-AN-1189-ZigBee-HA-Demo will not compile

jiweigao — Mon, 05 Sep 2016 15:52:48 GMT

Re: JN-AN-1189-ZigBee-HA-Demo will not compile

liuxiang — Mon, 27 Feb 2017 09:10:17 GMT

Hello, my beyond studio NXP compiler failed, you now know how to solve this problem? Now I have encountered the same problem, can you help me solve it? My mailbox, 344820717@qq.com. Thank you

Re: JN-AN-1189-ZigBee-HA-Demo will not compile

mario_castaneda — Tue, 28 Feb 2017 19:06:54 GMT

Hi JiWei,

The problem is having the application most likely in a folder other than C:\nxp\bstudio_nxp\workspace (probably C:\users\)

When trying to find the "sdk/JN-SW-4168/Stack/Common/Build/config.mk" file, it is using relative path to get to it assuming that it is in the correct directory.

Please change the workspace directory of beyond studio to "C:\nxp\bstudio_nxp\workspace"

Please let me know your findings.

Regards,

Mario

Re: JN-AN-1189-ZigBee-HA-Demo will not compile

liuxiang — Thu, 02 Mar 2017 02:10:22 GMT

Hi Mario Ignacio Castaneda Lopez

I also met compiled by question, in accordance with the method of you said, I'm sure my workspace path is "C: \ NXP \ bstudio_nxp \ workspace", but there are still compiling is not successful, like JiWei Gao said.Could you help me to solve it, thanks.

Re: JN-AN-1189-ZigBee-HA-Demo will not compile

mario_castaneda — Fri, 03 Mar 2017 01:38:28 GMT

Hi Liu,

The errors you are seeing in Eclipse are due to the indexer.

It sometimes resolves itself if you rebuild the indexer by right clicking on the project -> Index -> refresh all files

then right clicking on the project -> Index -> Rebuild.

You must have the includes file like this. Also please try to delete and import again.

Best Regards,

Mario

Re: JN-AN-1189-ZigBee-HA-Demo will not compile

liuxiang — Fri, 17 Mar 2017 03:21:38 GMT

Hello, Mario Ignacio Castaneda Lopez ,according to your method, I repeated several times, still have the above mentioned can not compile, you look at what other solution?

Re: JN-AN-1189-ZigBee-HA-Demo will not compile

liuxiang — Fri, 17 Mar 2017 03:24:39 GMT

Hello, Mario Ignacio Castaneda Lopez ,according to your method, I repeated several times, still have the above mentioned can not compile, you look at what other solution? My header file contains only in three, don't know why....

Re: JN-AN-1189-ZigBee-HA-Demo will not compile

limcb — Fri, 17 Mar 2017 05:58:52 GMT

Directory is "C:\NXP\bstudio_nxp\workspace\JN-AN-1189-ZigBee-HA-Demo" ?

Re: JN-AN-1189-ZigBee-HA-Demo will not compile

liuxiang — Sat, 18 Mar 2017 04:20:27 GMT

Yes, I am pretty sure this path, on the other hand, there is a problem, now I want to download a program using a serial port, but a lot of times, a serial port is always tip can't find the device ( I'm sure JN5168 is connected right).

Re: JN-AN-1189-ZigBee-HA-Demo will not compile

liuxiang — Sat, 18 Mar 2017 04:22:43 GMT

Re: JN-AN-1189-ZigBee-HA-Demo will not compile

liuxiang — Sat, 18 Mar 2017 04:25:23 GMT

Re: JN-AN-1189-ZigBee-HA-Demo will not compile

limcb — Mon, 20 Mar 2017 01:39:22 GMT

Hi, are you using Evaluation Kit and JN5168 Module to program ? Or are you using custom board ?

If custom board, please look at JN-RD-6036 ; DR1174_Main_Board_1V4.

Minimum connection to USB : 6 pin. RESETN, MISO, TX, RX, VCC, GND.

You need to program the FTDI chip CBUS2 and CBUS3 to I/O Mode using FT_Prog.exe, then you can program JN5168.

For path, please check if SDK; JN-SW-4168 v1470 is installed. Please make sure JN-AN-1189 is v1.12.

Re: JN-AN-1189-ZigBee-HA-Demo will not compile

liuxiang — Mon, 20 Mar 2017 01:45:50 GMT

Hello, I am using JN51680EK001 Evalnation Kit, my FTDI USB adapter RS232 chip driver has been installed, and the computer serial port can be found, but the IDE can not found JN5168.

Re: JN-AN-1189-ZigBee-HA-Demo will not compile

limcb — Mon, 20 Mar 2017 01:48:21 GMT

Please check

You need to program the FTDI chip CBUS2 and CBUS3 to I/O Mode using FT_Prog.exe

More info here: https://community.nxp.com/thread/436635#comment-865994

Re: JN-AN-1189-ZigBee-HA-Demo will not compile

liuxiang — Mon, 20 Mar 2017 02:14:40 GMT

Hello, I have to do that as you said, but IDE still can't find JN5168.

Re: JN-AN-1189-ZigBee-HA-Demo will not compile

limcb — Mon, 20 Mar 2017 02:21:11 GMT

Please try reconnect eval kit after programming FTDI. Then please check jumper on Eval Kit, make sure it is exactly as shown in red;

Re: JN-AN-1189-ZigBee-HA-Demo will not compile

liuxiang — Mon, 20 Mar 2017 02:38:27 GMT

Hello, thank you for solve my problem, I have made the wrong jumper Settings, there is a jumper Settings to the JTAG EN end.Why is set to the JTAG EN end will not be able to download a program using a serial port?Where there are books.
In addition, I still have some problems, such as mentioned in previous email, why I IDE the import JN1189 after, there will be a lot of mistakes, mainly is the path cannot be found, I'm sure my project path is "C: \ NXP \ bstudio_nxp \ workspace \ Jacqueline Nottingham - AN - 1189 - ZigBee - HA - Demo", and USES the Index - > fresh all files.

Re: JN-AN-1189-ZigBee-HA-Demo will not compile

limcb — Mon, 20 Mar 2017 02:47:40 GMT

For books, JN-RD-6036, DR1174_Schematic_1V4.pdf, you can see JTAG section, 74AUP1G157 , 74HC1G32 , 74HCT1G08.

74HCT1G08 disconnect RX (serial) when JTAG_EN (Jumper) is ON.

74AUP1G157 disconnect TX (serial) when JTAG_EN (Jumper) is ON.

No serial connection when Jumper JTAG is ON.

For path, please check if SDK; JN-SW-4168 v1470 is installed. Please make sure JN-AN-1189 is v1.12.

Re: JN-AN-1189-ZigBee-HA-Demo will not compile

liuxiang — Mon, 20 Mar 2017 02:59:06 GMT

hello

My SDK is indeed JN-SW-4168 v1470 and JN- AN - 1189 is v1.12, but there are still cannot compile problem.

In addition, read JN - UG - 3093, I found some problems:

Re: JN-AN-1189-ZigBee-HA-Demo will not compile

liuxiang — Mon, 20 Mar 2017 03:01:09 GMT

hello

My SDK is indeed JN-SW-4168 v1470 and JN- AN - 1189 is v1.12, but there are still cannot compile problem.

In addition, read JN - UG - 3093, I found some problems:

Note 2: For full details of the board, refer to the Carrier

and Expansion Boards Reference Manual (JN-RM-

2063) , available from the NXP Wireless Connectivity

TechZone (see “Support Resources” on page 8 ).

Support Resources

To access online support resources such as SDKs, Application Notes and User

Guides, visit the Wireless Connectivity TechZone:

www.nxp.com/techzones/wireless-connectivity

All NXP resources referred to in this manual can be accessed at the above address,

unless otherwise stated.

Why cannot open www.nxp.com/techzones/wireless-connectivity, why I can't find the JN - UG - 3093.