topic Re: read multplie index from circular buffer in Wireless MCU

read multplie index from circular buffer

vijay_0806 — Tue, 04 Jul 2023 11:07:54 GMT

Hello Every one.

I'm using jn5168 sdk here im facing issue with circular buffer (FIFO) i can't read multiple index in a loop .i can read only one segment at one time.

Re: read multplie index from circular buffer

Ricardo_Zamora — Wed, 05 Jul 2023 18:37:55 GMT

Hello,

Hope you are doing well. Could you please clarify what API's are you using?

If you are using a FIFO, you would need to read one by one.

Also, one important remark: JN5189/88T is preferred for any new Zigbee®, Thread design. No new software releases planned for JN5168.

Regards,

Ricardo

Re: read multplie index from circular buffer

vijay_0806 — Mon, 10 Jul 2023 05:35:42 GMT

Hello,

im using iAHi (apphardwareAPi_jn516x.h) using for writing ad reading through EEPROM segments,

Re: read multplie index from circular buffer

Ricardo_Zamora — Mon, 10 Jul 2023 14:26:31 GMT

Hello,

Could you please help me checking this User Guide (JN516x Integrated Peripherals API User Guide)? Are the parameters correct?

Regards,

Ricardo

Re: read multplie index from circular buffer

vijay_0806 — Tue, 11 Jul 2023 10:22:40 GMT

Hello,

jn-3087 api peripherals using for sensor ,actually am working with nits sensor i need send multiple reading(timestamp,temp reading,battery status) to hat in single data packet while hat after wake up i need to send .I'm using 64 segment internal eeprom also initialized circular buffer in ram .