Which debug probe to use for programming & debugging the JN5189.

Kunal_Gupta — Mon, 19 Dec 2022 10:17:24 GMT

I am developing the custom Eval board based on JN5189, which is breadboard compatible as my hobby project. I want to know which debug probe can be used for programming & debugging the JN5189 IC.

Would MCU link debug probe, work for programming and debugging the JN5189 IC?

What i want to achieve is like there is STM32 Blue Pill Eval Board based on STM32F103 MCU, and for that we use STLINKV2 debugger & programmer.

So is there any Debugger Programmer for NXP MCU's also?

Re: Which debug probe to use for programming & debugging the JN5189.

EduardoZamora — Mon, 19 Dec 2022 17:08:30 GMT

Hello @Kunal_Gupta

Hope you are doing well.

MCU Link Debug Probe has been tested on JN5189 using the Carrier Main Board OM15076 and should work for your project.

Regards,
Eduardo.

topic Re: Which debug probe to use for programming & debugging the JN5189. in Wireless MCU

Which debug probe to use for programming & debugging the JN5189.

Re: Which debug probe to use for programming & debugging the JN5189.