https://community.nxp.com/t5/Wireless-MCU/CLRC663-I2C-LoadProtocol-Error/m-p/1499576#M13499 <P>Hello,</P><P><SPAN>I am using CLRC663 with I2C configuration in my project. eeprom error occurs every time I try to send load protocol command. Is there any known error about this situation?</SPAN></P> Tue, 02 Aug 2022 12:28:35 GMT octopus 2022-08-02T12:28:35Z https://community.nxp.com/t5/Wireless-MCU/CLRC663-I2C-LoadProtocol-Error/m-p/1499576#M13499 <P>Hello,</P><P><SPAN>I am using CLRC663 with I2C configuration in my project. eeprom error occurs every time I try to send load protocol command. Is there any known error about this situation?</SPAN></P> Tue, 02 Aug 2022 12:28:35 GMT https://community.nxp.com/t5/Wireless-MCU/CLRC663-I2C-LoadProtocol-Error/m-p/1499576#M13499 octopus 2022-08-02T12:28:35Z https://community.nxp.com/t5/Wireless-MCU/CLRC663-I2C-LoadProtocol-Error/m-p/1499805#M13502 <P>Hello,</P> <P>&nbsp;</P> <P>Please help us check the following <A href="https://www.nxp.com/docs/en/application-note/AN12657.pdf" target="_self">AN</A> for more details on the load protocol.</P> <P>&nbsp;</P> <P>Regards</P> Tue, 02 Aug 2022 20:37:40 GMT https://community.nxp.com/t5/Wireless-MCU/CLRC663-I2C-LoadProtocol-Error/m-p/1499805#M13502 stephanie_m 2022-08-02T20:37:40Z https://community.nxp.com/t5/Wireless-MCU/CLRC663-I2C-LoadProtocol-Error/m-p/1500074#M13506 <P>Thank you for answer. I figure out LoadProtocol problem. It was about how write FIFOData register so this is solved. But I have another problem. When I tried to use transceive command, again EEPROM error is occured.&nbsp;</P><P>I am using STM32 as MCU and I2C as communication protocol.</P> Wed, 03 Aug 2022 07:56:33 GMT https://community.nxp.com/t5/Wireless-MCU/CLRC663-I2C-LoadProtocol-Error/m-p/1500074#M13506 octopus 2022-08-03T07:56:33Z