Trouble with FlashCli

mariocosta — Tue, 23 Aug 2016 13:24:32 GMT

I'm using the following command using the FlashCli command line utility to program JN5168 devices and the the MAC address to a specific value:

C:\>\Tools\flashprogrammer\FlashCLI -s -a -c COM10 -m 00:15:8D:00:00:02:00:05 -f C:\NXP\bstudio_nxp\workspace\xxxxxx_xxx_xxxx_Build\Binary\0xXXXXXXXXu_xxxxxxx

_Router_JN5168_DEBUG.bin

It consistently fails with the following message:

NXP JN51xx Flash Programmer 1.8.9

------------------------------------

Connecting to device on COM10.

Verifying connection to flash

Connected device Information:

Devicelabel: JN516x, BL 0x00080006

FlashLabel: Internal Flash (256K)

Memory: 0x00008000 bytes RAM, 0x00040000 bytes Flash

ChipPartNo: 8

ChipRevNo: 1

ROM Version: 0x00080006

MAC Address: 00:15:8D:00:00:DC:77:95

ZB License: 0x00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00

User Data: 00:00:00:00:00:00:00:00

FlashMID: 0xCC

FlashDID: 0xEE

MacLocation: 0x00000010

Sector Length: 0x08000

Bootloader Version: 0x00080006

Saving MAC and license

Programmming file C:\NXP\bstudio_nxp\

xxxxxx_xxx_xxxx_Build\Binary\0xXXXXXXXXu_xxxxxxx

_Router_JN5168_DEBUG.bin

Using MAC address '00:15:8D:00:00:02:00:05'

Program write once MAC address with: 00:15:8D:00:00:02:00:05

(yes / no) >

Traceback (most recent call last):

File "FlashCLI.py", line 494, in CLIMain

File "FlashUtils.pyo", line 1178, in bProgramJN615xMacAddress

FlashUtilsError

Please explain what I'm doing wrong. I could not find any example showing how to program the MAC address using the command line tool.

Thanks

Mario

Re: Trouble with FlashCli

mario_castaneda — Mon, 03 Apr 2017 21:47:20 GMT

Hi Mario,

I recommended to you, check the JN51xx Production Flash Programmer User Guide, use the JN51xxProgrammer.exe

3.5 Set MAC Address of JN51xx Device

http://www.nxp.com/documents/user_manual/JN-UG-3099.pdf

Regards,

Mario

topic Re: Trouble with FlashCli in Wireless MCU

Trouble with FlashCli

Re: Trouble with FlashCli