JN5189 add WWAH

LChll — Thu, 31 Mar 2022 03:50:13 GMT

The SDK version of JN5189 is 2.6.4, and the jN-AN-1244 routine is 2005.

I have installed the add Cluster step to add this WWAH.

Is your WWAH function available?

The following error was reported when I compiled:

c:/nxp/mcuxpressoide_11.5.0_7232/ide/tools/bin/../lib/gcc/arm-none-eabi/10.3.1/../../../../arm-none-eabi/bin/ld.exe: ../../../Binaries/ExtendedColorLight_NtagIcode_GpCombo_Ota_OM15081/obj/WWAHCommandHandler.o: in function `eCLD_WWAHCommandHandler':
WWAHCommandHandler.c:(.text.eCLD_WWAHCommandHandler+0x9b4): undefined reference to `ZPS_u8AplExtdedAibGetWWAH'
c:/nxp/mcuxpressoide_11.5.0_7232/ide/tools/bin/../lib/gcc/arm-none-eabi/10.3.1/../../../../arm-none-eabi/bin/ld.exe: WWAHCommandHandler.c:(.text.eCLD_WWAHCommandHandler+0x9be): undefined reference to `ZPS_vAplExtdedAibSetWWAH'
c:/nxp/mcuxpressoide_11.5.0_7232/ide/tools/bin/../lib/gcc/arm-none-eabi/10.3.1/../../../../arm-none-eabi/bin/ld.exe: WWAHCommandHandler.c:(.text.eCLD_WWAHCommandHandler+0xa2c): undefined reference to `ZPS_u8AplExtdedAibGetWWAH'
c:/nxp/mcuxpressoide_11.5.0_7232/ide/tools/bin/../lib/gcc/arm-none-eabi/10.3.1/../../../../arm-none-eabi/bin/ld.exe: WWAHCommandHandler.c:(.text.eCLD_WWAHCommandHandler+0xa34): undefined reference to `ZPS_vAplExtdedAibSetWWAH'
c:/nxp/mcuxpressoide_11.5.0_7232/ide/tools/bin/../lib/gcc/arm-none-eabi/10.3.1/../../../../arm-none-eabi/bin/ld.exe: WWAHCommandHandler.c:(.text.eCLD_WWAHCommandHandler+0xa5a): undefined reference to `ZPS_u8AplExtdedAibGetWWAH'
c:/nxp/mcuxpressoide_11.5.0_7232/ide/tools/bin/../lib/gcc/arm-none-eabi/10.3.1/../../../../arm-none-eabi/bin/ld.exe: WWAHCommandHandler.c:(.text.eCLD_WWAHCommandHandler+0xa64): undefined reference to `ZPS_vAplExtdedAibSetWWAH'
collect2.exe: error: ld returned 1 exit status
make: *** [Makefile:688: ../../../Binaries/ExtendedColorLight_NtagIcode_GpCombo_Ota_OM15081/ExtendedColorLight_NtagIcode_GpCombo_Ota_OM15081.axf] Error 1

Re: JN5189 add WWAH

Ricardo_Zamora — Wed, 06 Apr 2022 17:09:50 GMT

Hello,

Could you please describe how did you install the add Cluster step to add this WWAH?

What MCUXpresso IDE are you using?

Regards,

Ricardo

Re: JN5189 add WWAH

LChll — Thu, 07 Apr 2022 06:39:26 GMT

hi,

I have followed the usual steps to add the cluster.

Re: JN5189 add WWAH

Ricardo_Zamora — Mon, 11 Apr 2022 17:17:37 GMT

Hi,

Did you add the WWAH files to your project?

You can find them in the SDK. (Path: \middleware\wireless\zigbee\ZCL\Clusters\General\Source)

Regards,

Ricardo

Re: JN5189 add WWAH

LChll — Tue, 12 Apr 2022 02:19:24 GMT

how to add to the project, normally adding other clusters is this step.

Wireless MCUのトピックRe: JN5189 add WWAH

JN5189 add WWAH

Re: JN5189 add WWAH

Re: JN5189 add WWAH

Re: JN5189 add WWAH

Re: JN5189 add WWAH