Wireless MCUのトピックRe: Peer to peer communication

Peer to peer communication

motog — Mon, 29 Nov 2021 12:23:46 GMT

Hello,

I have designed my custom board using PN7362 IC for door access project and it is working properly. Now I want to communicate with other board using peer to peer mode. So you can please guide me how to do that. Are there any reference manual which I can refer to?? I have also searched the community but found nothing useful.

Re: Peer to peer communication

fangfang — Tue, 30 Nov 2021 02:22:35 GMT

Hello,

The NFC reader library provides software example for this mode but only to interact with another NXP evaluation board which you may take as a reference for your
specific implementation.

For the library please kindly refer to the link.

URL:https://www.nxp.com/design/designs/nfc-reader-library-software-support-for-nfc-frontend-solutions:NFC-READER-LIBRARY.

Have a nice day.

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!
- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-----------------------------------------------------------------------------

Re: Peer to peer communication

motog — Tue, 30 Nov 2021 06:17:37 GMT

I have downloaded the library, but was not able to identify which example should be used for this.

If you could please tell me which example to be used?

Re: Peer to peer communication

fangfang — Wed, 01 Dec 2021 02:25:53 GMT

Hello,

Thanks for your information. For the detail information you will find it as the link.

URL:https://www.nxp.com/docs/en/user-guide/UM10913.pdf.

Hope it help you.

Re: Peer to peer communication

motog — Wed, 01 Dec 2021 10:10:02 GMT

Thank you for your reply. I have one more doubt.

I'm using PN7362 IC for my application, but the readme.txt file says it is not applicable for pn7362 ic. So will I be able to use this example?

And what does "until activation" which is given in braces means?? Do I need Doc store access for that?

Re: Peer to peer communication

motog — Thu, 02 Dec 2021 05:52:22 GMT

When I running Ex3_NFCForum example I'm getting following error(file attached). I tried to refer ph_status.h file, but the error code mentioned is not there! Can you please tell what does it means?

Re: Peer to peer communication

fangfang — Fri, 03 Dec 2021 08:51:40 GMT

Hello,

Yes. The library is OK for the product.

>> what does "until activation" which is given in braces means?? Do I need Doc store access for that?

Would you please provide the detail and I will check it if need the Docstore access.

Re: Peer to peer communication

motog — Fri, 03 Dec 2021 11:40:16 GMT

I have added the img.

Can you please tell what does the error mentioned means(nfc_forum.png file)? I am not able to find anything related to it.

Re: Peer to peer communication

motog — Thu, 09 Dec 2021 11:24:11 GMT

@fangfang I'm still stuck at the above part. It would be really helpful if you could provide some information regarding it.