topic Re: Missing DK6Programmer.exe? in Wireless MCU

Missing DK6Programmer.exe?

Alsanie — Fri, 03 Sep 2021 16:57:55 GMT

Hello,
I am trying to follow the example:
https://www.nxp.com/document/guide/getting-started-with-the-k32w061:GS-K32W061

which build the example and flash it. But I can't find the tool "DK6Programmer" anywhere.

Re: Missing DK6Programmer.exe?

Ricardo_Zamora — Fri, 03 Sep 2021 21:38:33 GMT

Hi Alsanie,

You can find the DK6 Production Flash Programmer installer in the SDK (Path: SDK_2_6_4_K32W041ADK6\tools\JN-SW-4407-DK6-Flash-Programmer).

The Install Location by default will be "C:\NXP\DK6ProductionFlashProgrammer\".

Hope this helps.

Regards,

Ricardo

Re: Missing DK6Programmer.exe?

Alsanie — Mon, 06 Sep 2021 21:40:18 GMT

Than you!

Re: Missing DK6Programmer.exe?

SpecialCodeMaster — Mon, 08 Apr 2024 21:15:34 GMT

hello,

i have a problem with loading my file . bin using usb to my pcb i installed the application dk6 programmer i defined my usb in pc by zigbee gateway user interface i followed the tutorial video for it in k32061 with jn5189 i connect the usb and i made the following commands

1-DK6Programmer = he gave me that the dk6 is defined in my cmd

2-DK6Programmer.exe -l = he gave my port number for my usb (COM5)

3-DK6Programmer -s COM5 -P 500000 -e FLASH -Y -p MyFile.bin = he gave me error opening connection

why he give me that in fact in the zigbee gateway user interface when i pressed open port and then startNWK he gave me that like he send data for the usb but in the received message section there is no response. can you help me?