topic Re: How to do auto reporting on end device? in Wireless MCU https://community.nxp.com/t5/Wireless-MCU/How-to-do-auto-reporting-on-end-device/m-p/510094#M1149 <HTML><HEAD></HEAD><BODY><P>Hello Randolf, right now this is not supported but could be implemented at application layer, sending a custom COAP message, you'd need to implement an interval timer that triggers a temperature message within the COAP callback.</P></BODY></HTML> Tue, 31 May 2016 15:47:07 GMT jc_pacheco 2016-05-31T15:47:07Z How to do auto reporting on end device? https://community.nxp.com/t5/Wireless-MCU/How-to-do-auto-reporting-on-end-device/m-p/510093#M1148 <HTML><HEAD></HEAD><BODY><P>Hi Sir,</P><P></P><P> Since Thread v1.0.0 doesn't support "observe" in COAP. So if we want to get temperature from end device. We have to send Coap request every time. I would like to know if there have any THCI command which can report it's temperature to gateway automatically?</P><P></P><P>Thanks</P><P>Randolf</P></BODY></HTML> Mon, 09 May 2016 07:19:51 GMT https://community.nxp.com/t5/Wireless-MCU/How-to-do-auto-reporting-on-end-device/m-p/510093#M1148 randolfhu 2016-05-09T07:19:51Z Re: How to do auto reporting on end device? https://community.nxp.com/t5/Wireless-MCU/How-to-do-auto-reporting-on-end-device/m-p/510094#M1149 <HTML><HEAD></HEAD><BODY><P>Hello Randolf, right now this is not supported but could be implemented at application layer, sending a custom COAP message, you'd need to implement an interval timer that triggers a temperature message within the COAP callback.</P></BODY></HTML> Tue, 31 May 2016 15:47:07 GMT https://community.nxp.com/t5/Wireless-MCU/How-to-do-auto-reporting-on-end-device/m-p/510094#M1149 jc_pacheco 2016-05-31T15:47:07Z