https://community.nxp.com/t5/Wireless-MCU/How-to-separate-advertising-data-and-scan-response-data-by/m-p/1248757#M10925 <P>Hi,</P><P>I am using a BLE project of Passthrough 097. I decode scan response data at function of app_gap_dev_inq_result_handler in the file of app_gap_task.c.&nbsp;But, the system pass advertising data and scan response data to this function. So many advertising data interference scan response data decoding.<BR />How to filter advertising data? Make the system not send advertising data to this function?</P> Fri, 19 Mar 2021 08:52:39 GMT tedwu1 2021-03-19T08:52:39Z https://community.nxp.com/t5/Wireless-MCU/How-to-separate-advertising-data-and-scan-response-data-by/m-p/1248757#M10925 <P>Hi,</P><P>I am using a BLE project of Passthrough 097. I decode scan response data at function of app_gap_dev_inq_result_handler in the file of app_gap_task.c.&nbsp;But, the system pass advertising data and scan response data to this function. So many advertising data interference scan response data decoding.<BR />How to filter advertising data? Make the system not send advertising data to this function?</P> Fri, 19 Mar 2021 08:52:39 GMT https://community.nxp.com/t5/Wireless-MCU/How-to-separate-advertising-data-and-scan-response-data-by/m-p/1248757#M10925 tedwu1 2021-03-19T08:52:39Z https://community.nxp.com/t5/Wireless-MCU/How-to-separate-advertising-data-and-scan-response-data-by/m-p/1249928#M10936 <P>Hi&nbsp;<a href="https://community.nxp.com/t5/user/viewprofilepage/user-id/167590">@tedwu1</a>,</P> <P>Could you please confirm the BLE example that you are working on?</P> <P>I am not sure if I am following the issue that you are facing, Are you working with a central or peripheral device?</P> <P>You could implement a filter policy but I am not sure about your application.</P> <P>Regards,</P> <P>Mario</P> Mon, 22 Mar 2021 23:07:11 GMT https://community.nxp.com/t5/Wireless-MCU/How-to-separate-advertising-data-and-scan-response-data-by/m-p/1249928#M10936 mario_castaneda 2021-03-22T23:07:11Z