topic ZigBee Coordinator send leave request to route device [Range Extender] in Wireless MCU

ZigBee Coordinator send leave request to route device [Range Extender]

bhautik_ruparel — Thu, 22 Oct 2020 04:45:40 GMT

Hello Support Team,

ZigBee Coordinator form the network and end device joined successfully with coordinator. Then try to join router device configure as a [dimmer light] range extender and successfully joined with coordinator but after immediately Coordinator send leave request to route device.

Please find below device details:

NWK Key : 0B:D4:C9:FA:37:10:D5:96:23:0C:A1:F2:CF:C8:2D:0E

Coordinator Short Address : 0x00

Coordinator MAC/IEEE Address : 00:15:8D:00:02:00:39:16

Router Short Address : 0xD592

Router MAC/IEEE Address : 00:0D:6F:00:11:37:EF:5D

i.e.

.....

Simple Descriptor Request

Simple Descriptor Response

Bind Request

Bind Response

Route Request

Leave

......

Please find attached Ubiqua ZigBee packet logs.

How can I resolve this Issue?

Re: ZigBee Coordinator send leave request to route device [Range Extender]

bhautik_ruparel — Thu, 22 Oct 2020 11:22:27 GMT

Hi @mario_castaneda ,

Can you please help me out to resolve this issue.

Re: ZigBee Coordinator send leave request to route device [Range Extender]

mario_castaneda — Thu, 22 Oct 2020 21:15:27 GMT

Hi @bhautik_ruparel,

I hope you are doing great.

You are working with the JN5179, the device is end of life. Unfortunately, we do not support this device.

Sorry for any inconvenience that this may cause you.

Regards,

Mario