topic KW36 can’t open Config Tools(Pin) in Wireless MCU

KW36 can’t open Config Tools(Pin)

danieltseng — Mon, 18 May 2020 12:19:51 GMT

The environment I use is as follows:

IDE:

SDK:

I want to use Pin config tool as follows:
Step1: Select project, then click "Open Pins"

Step2: The download progress bar of MKW36Z512xxx4 appears

Step 3: The message that does not support MKW36Z512xxx4 appears, as follows:

I have checked that my network is connected, and I still get an error signal.

How can I enter the pin Config Tool？

Re: KW36 can’t open Config Tools(Pin)

Omar_Anguiano — Tue, 19 May 2020 19:36:51 GMT

Hello Daniel Tseng

In the tab, ConfigTools->Data Manager make sure the FRDM-KW36 data is cached and up-to-date. Another suggestion I have is to download the latest SDK version, v2.2.3 Welcome | MCUXpresso SDK Builder

Let me know if this is helpful, if you have more questions do not hesitate to ask me.

Best regards,

Omar