Vybrid IOMUX

rkd — Wed, 25 Sep 2013 08:12:16 GMT

Hi,

is there any IOMUX tool for the vybrid series?

Could you also confirm if the following mapping is correct?

UART0:

- SCI0-TX, RX, CTS, RTS

UART1:

- SCI1-TX, RX, CTS, RTS

UART2:

- SCI2-TX, RX, CTS, RTS

UART3:

- SCI3-TX, RX, CTS, RTS

UART4:

- SCI4-TX, RX, CTS, RTS

I found all of the above on ball pin mapping.

But, 19.8.2.2 of the reference manual is telling me differently?

Thanks

~RD

Re: Vybrid IOMUX

MehmetAliIpin — Wed, 25 Sep 2013 11:42:22 GMT

Dear R D,

you will se two excel tables on the upper left hand corner of the pdf file. These are the IOMUX tools forr Vybrid series.

Mehmet Ali