Vybrid ProcessorsのトピックRe: Code/Patch for u-boot that boot from QSPI?

Code/Patch for u-boot that boot from QSPI?

juangutierrez — Mon, 25 Nov 2013 21:39:25 GMT

timesyssupport would you have some patch that you can share to build and get vybrid u-boot that boots from QSPI?

karina_valencia — Tue, 26 Nov 2013 19:42:41 GMT

timesyssupport can you help on this case?

timesyssupport — Tue, 26 Nov 2013 22:23:13 GMT

Hello Juan,

Unfortunately, the current u-boot 2011.12 does not support QSPI-NOR boot. TFTP/NFS, SD, and NAND boot are the current supported boot options.

Thanks,

Timesys Support

juangutierrez — Mon, 16 Dec 2013 21:00:45 GMT

I have created a couple of patches on top of Timesys u-boot for make it bootable from QSPI (for TWR board)

For building it. After apply the patches make a clean build.

make clean

make vybrid_config

make u-boot

make u-boot.imx

The u-boot.imx output image file is ready to be flashed into QSPI.