i.MX6(RSB4411-SBC)_ Boot_Prints_Issue

Devendra1 — Thu, 15 Jun 2023 04:39:53 GMT

Hi All,

I am getting garbage prints in debug console(Board is booting properly) while booting with default images which comes with the board. With help of HDMI interface i can see kernel and u-boot version after board is booting.
Kernel- version:4.1.15
U-boot version: 2016.03
Tried with different baud rates still issue is there.

Find below boot prints in minicom console for reference.

Welcome to minicom 2.8

OPTIONS: I18n
Port /dev/ttyACM0, 09:56:51

��w[}e��q-{��YY^��ueݽ�-��sYgAYwoy��倭�WW�mw��53��嵵��#1��;=7�y[y��-#1�753='�5#-#%5#��[��5='��a��5='��u��5='��WW�mw��53��Y_^뺺ڿ��s��{��}�� 7�!�!�=!;!!��￟��元�i�k�^�J #
�/5'��元��K.8��}�gmS��13;9�#�9!%%=#7��i�kl+��5�3=-'57��YY^�5=7��75��;'!9)��9!#��;!!-#1�3%�-c}cw��k%-#1�!�U�{!!��ޯU�{!!��}�gmS�{�1;�3�59��e=�� o
�%�-!�'%�=��c!�!�75-95�755957��'��==A-#--='- �!#7�!�!'=15�5'59��'��%%9�75��-#-�3=-'57��_+��'!��!��q;��-%'�Y}W}�%!75��'=1��#9�=1 '

Thanks in Advance!

Embedded Software and Tools Clinic中的主题 i.MX6(RSB4411-SBC)_ Boot_Prints_Issue

i.MX6(RSB4411-SBC)_ Boot_Prints_Issue