Eclipse Debug Config Starting J-Link GDB Server Error using J-Link IMX6ULL

jesseli25 — Tue, 15 Mar 2022 10:40:15 GMT

H Guys,

Configuring J-Link GDB Sever on Eclipse to debug FreeRTOS app, target imx6ull.

Got Starting J-Link GDB Server timed out Error:

1.PNG

Detailed Error:

2.PNG

An internal error occurred during: "Starting J-Link GDB Server". RequestMonitor: Sequence "", result for executing step #1 = Status ERROR: org.eclipse.cdt.dsf code=10005 Request for monitor: 'RequestMonitor (org.eclipse.embedcdt.debug.gdbjtag.core.dsf.GnuMcuGdbServerBackend$GdbServerStep$1@4ff3db76): Status OK: unknown code=0 OK' resulted in a rejected execution exception., done() method called more than once

Configurations are:

4.PNG

5.PNG

6.PNG

GDB Server log:

SEGGER J-Link GDB Server V6.14h GUI Version JLinkARM.dll V6.14h (DLL compiled May 10 2017 18:22:45) -----GDB Server start settings----- GDBInit file: none GDB Server Listening port: 2331 SWO raw output listening port: 2332 Terminal I/O port: 2333 Accept remote connection: localhost only Generate logfile: off Verify download: on Init regs on start: off Silent mode: off Single run mode: off Target connection timeout: 5000 ms ------J-Link related settings------ J-Link Host interface: USB J-Link script: ddr_init.jlinkscript J-Link settings file: none ------Target related settings------ Target device: MCIMX6Y2 Target interface: JTAG Target interface speed: 4000kHz Target endian: little Connecting to J-Link... J-Link is connected. Firmware: J-Link V10 compiled Apr 21 2017 10:28:25 Hardware: V10.10 S/N: 820102410 Feature(s): GDB Checking target voltage... Target voltage: 3.30 V Listening on TCP/IP port 2331 Connecting to target...WARNING: At least one of the connected devices is not JTAG compliant (IEEE Std 1149.1, 7.1.1.d, IR-cells). (NumDevices = 3, NumBitsSet = 2) J-Link found 3 JTAG devices, Total IRLen = 13 JTAG ID: 0x5BA00477 (Cortex-A7) Connected to target Waiting for GDB connection...

8.PNG

9.PNG

Could you please see what did I miss? Thanks so much for your support!

Re: Eclipse Debug Config Starting J-Link GDB Server Error using J-Link IMX6ULL

ZeroWill — Fri, 03 Feb 2023 08:47:15 GMT

Select GDBServerCL.exe instead of GDBServer.exe

topic Re: Eclipse Debug Config Starting J-Link GDB Server Error using J-Link IMX6ULL in Embedded Software and Tools Clinic

Eclipse Debug Config Starting J-Link GDB Server Error using J-Link IMX6ULL

Re: Eclipse Debug Config Starting J-Link GDB Server Error using J-Link IMX6ULL