https://community.nxp.com/t5/Embedded-Software-and-Tools/Error-when-write-in-a-Mifare-Classic-1k-Tag/m-p/1222505#M162 <P>Good morning all,<BR />I develop in asm on PIC18 to drive a PN7150.<BR />I perform reads / writes on a TAG Mifare Classic 1K using the Mifare protocol.<BR />Authentication is going well as are reads from all sectors.<BR />But during a write, the write request on a block returns Ok but after the data transfer I have a $10 $B2 notification.<BR />What is this error? Thank you</P> Thu, 28 Jan 2021 08:38:57 GMT grubnxp 2021-01-28T08:38:57Z https://community.nxp.com/t5/Embedded-Software-and-Tools/Error-when-write-in-a-Mifare-Classic-1k-Tag/m-p/1222505#M162 <P>Good morning all,<BR />I develop in asm on PIC18 to drive a PN7150.<BR />I perform reads / writes on a TAG Mifare Classic 1K using the Mifare protocol.<BR />Authentication is going well as are reads from all sectors.<BR />But during a write, the write request on a block returns Ok but after the data transfer I have a $10 $B2 notification.<BR />What is this error? Thank you</P> Thu, 28 Jan 2021 08:38:57 GMT https://community.nxp.com/t5/Embedded-Software-and-Tools/Error-when-write-in-a-Mifare-Classic-1k-Tag/m-p/1222505#M162 grubnxp 2021-01-28T08:38:57Z https://community.nxp.com/t5/Embedded-Software-and-Tools/Error-when-write-in-a-Mifare-Classic-1k-Tag/m-p/1223207#M164 <P>It looks like this is from the <STRONG>NCI indicating</STRONG> in :</P><P>RF Interface Specific Status Codes that the error <STRONG>$B2 means RF_TIMEOUT_ERROR.</STRONG></P> Fri, 29 Jan 2021 10:16:09 GMT https://community.nxp.com/t5/Embedded-Software-and-Tools/Error-when-write-in-a-Mifare-Classic-1k-Tag/m-p/1223207#M164 grubnxp 2021-01-29T10:16:09Z