topic Re: T1042 program tool in T-Series

T1042 program tool

shinbo — Mon, 04 Jul 2022 04:29:24 GMT

1. What is the method for programming the work done in code warrior in t1042?
2. Also, what are the program tools?
ex) xilinx, ise impact

Plz, give me a beginner's guide if you have one.

Re: T1042 program tool

yipingwang — Wed, 06 Jul 2022 06:54:28 GMT

Please refer to this step by step user guide about CodeWarrior flash programming for Power Architecture.

https://community.nxp.com/t5/CodeWarrior-Development-Tools/Flash-Programmer-for-CodeWarrior-Power-Architecture/ta-p/1110721

Please download and install CodeWarrior 10.5.1 from the following link.

https://drive.google.com/file/d/18YIFeSnzZlcE1ZgSNUlTYM955gh9_B56/view?usp=sharing

1. Please configure your target board as hard-coded RCW if no valid RCW on the target board.

2. Please create a bareboard project with SRAM launch configuration selected.

3. Connect to the target board from Run > Debug Configurations.

4. Please execute the flash programming task.

Re: T1042 program tool

shinbo — Wed, 06 Jul 2022 07:15:36 GMT

Thank you for your answer
Let me ask you one more question.
What extension file do I need to debug RCW?
Please let me know if you have a guide document.

Re: T1042 program tool

yipingwang — Mon, 18 Jul 2022 08:00:25 GMT

You could use JTAG configuration file to override RCW on the target board.

Please refer to section "8.4 Setting up a remote system to use a JTAG configuration file" in C:\Freescale\CW_PA_v10.5.1\PA\Help\PDF\Targeting_PA_Processors.pdf.