topic Re: QCVS error configuring NOR FLASH in T-Series

QCVS error configuring NOR FLASH

sergiohernandez — Mon, 30 May 2016 07:26:26 GMT

I'm generatin a new RCW with QCVS 4.5 for a T2080 board.

When I try to configure RCW_SRC, PBI_SRC and BOOT_LOC to NOR Flash, QCVS shows an error, why?

When I change PBI_SRC or BOOT_LOC to another interface there is no error.

If I try the same configuration with previous versions of QVCS (4.2.1) there is no error for this configuration.

Re: QCVS error configuring NOR FLASH

addiyi — Mon, 30 May 2016 07:37:32 GMT

It is just an warning. You can ignore it by selecting Advanced tab and Ignore Constrains and Non-Critical errors.

Adrian

Re: QCVS error configuring NOR FLASH

sergiohernandez — Mon, 30 May 2016 07:51:05 GMT

Ok, but why it is considered an ERROR, I think it is a valid configuration.

De: addiyi

Enviado el: lunes, 30 de mayo de 2016 9:38

Para: Hernández Sánchez, Sergio

Asunto: Re: - QCVS error configuring NOR FLASH

NXP Community <https://community.freescale.com/resources/statics/1000/35400-NXP-Community-Email-banner-600x75.jpg>

QCVS error configuring NOR FLASH

reply from Adrian-Mihai Stoica<https://community.nxp.com/people/addiyi?et=watches.email.thread> in QorIQ Processing Platforms - View the full discussion<https://community.nxp.com/message/655446?et=watches.email.thread#comment-655446>

Re: QCVS error configuring NOR FLASH

addiyi — Mon, 30 May 2016 08:13:57 GMT

Could you add your PBL binary? Also, what Soc rev have you selected?

Adrian

Re: QCVS error configuring NOR FLASH

sergiohernandez — Mon, 30 May 2016 08:28:22 GMT

I’ve selected V1.1

PBL generated is attached to this email.

De: addiyi

Enviado el: lunes, 30 de mayo de 2016 10:15

Para: Hernández Sánchez, Sergio

Asunto: Re: - QCVS error configuring NOR FLASH

NXP Community <https://community.freescale.com/resources/statics/1000/35400-NXP-Community-Email-banner-600x75.jpg>

QCVS error configuring NOR FLASH

Re: QCVS error configuring NOR FLASH

addiyi — Mon, 30 May 2016 10:55:06 GMT

No error on my side:

Could you please provide the QCVS build number. Go to Help > About CodeWarrior, click on QCVS icon and provide the version number.

Adrian

Re: QCVS error configuring NOR FLASH

sergiohernandez — Mon, 30 May 2016 11:05:30 GMT

I’m using eclipse version installed in VirtualBox provided by NXP witk SDK 1.9

De: addiyi

Enviado el: lunes, 30 de mayo de 2016 12:56

Para: Hernández Sánchez, Sergio

Asunto: Re: - QCVS error configuring NOR FLASH

NXP Community <https://community.freescale.com/resources/statics/1000/35400-NXP-Community-Email-banner-600x75.jpg>

QCVS error configuring NOR FLASH

Re: QCVS error configuring NOR FLASH

addiyi — Mon, 30 May 2016 11:21:47 GMT

Please upgrade to QCVS 4.5 which is the latest release.

Adrian

Re: QCVS error configuring NOR FLASH

sergiohernandez — Mon, 30 May 2016 13:15:42 GMT

Ok, after update no error is show.

Thank you.

De: addiyi

Enviado el: lunes, 30 de mayo de 2016 13:23

Para: Hernández Sánchez, Sergio

Asunto: Re: - QCVS error configuring NOR FLASH

NXP Community <https://community.freescale.com/resources/statics/1000/35400-NXP-Community-Email-banner-600x75.jpg>

QCVS error configuring NOR FLASH