topic Codewarrior Tap: Failed to reset target, Core not responding. in T-Series

Codewarrior Tap: Failed to reset target, Core not responding.

Amit-Kumar — Tue, 05 Oct 2021 09:38:18 GMT

Hi Members,

We have a custom hardware based on T1023RDB, and intend to flash RCW, U-Boot plus other loads for the first time. For that the board is configured for hardcoded RCW option. Parameter [0:8] CFG_RCW_src=0x9E. But the issue we are getting is this:

Following set of options are used to connect/debug for Bare metal project.

The error message is this:

Updated CCS session logs attached (JTAG Diags enabled).

Please highlight any issues if any from logs.

Re: Codewarrior Tap: Failed to reset target, Core not responding.

Amit-Kumar — Tue, 05 Oct 2021 09:36:43 GMT

@yipingwang : Have a glance please, Thanks!!.

Re: Codewarrior Tap: Failed to reset target, Core not responding.

ufedor — Tue, 05 Oct 2021 19:10:51 GMT

Please provide the processor connection schematics for inspection as searchable PDF.

Re: Codewarrior Tap: Failed to reset target, Core not responding.

Amit-Kumar — Thu, 07 Oct 2021 09:49:03 GMT

Sorry for inconvenience. you can close the discussion. I realized that same thread is being discussed by few folks in our company with NXP guys.