QorIQ Linux SDK and ToolChain for T2080 RDB

anshulkhare — Mon, 27 Aug 2018 14:13:40 GMT

Hi All,

I have an T2080-RDB board,
i am a beginner for this board, which linux SDK will supports T2080 RDB,

and which tool chain is the better option for this.

kindly share the Installation procedure for the tool chain.

Thanks in Advance.

Regards,

Anshul

Re: QorIQ Linux SDK and ToolChain for T2080 RDB

Pavel — Tue, 28 Aug 2018 07:49:21 GMT

Use the following link for SDK 2.0 downloading:

https://www.nxp.com/support/developer-resources/run-time-software/linux-software-and-development-tools/linux-sdk-for-qoriq-processors:SDKLINUX?tab=Design_Tools_Tab#nogo

Press "Download" on this page.

Sign your account.

Load

QorIQ Linux SDK v2.0 SOURCE.iso file

Use Ubuntu 14. Do not use Ubuntu 16.

Usually the following command sequence is used for SDK installing under Ubuntu 14.04 64-bit:

sudo apt-get install ubuntu-minimal ubuntu-standard patch vim-common sed wget subversion git-core coreutils libbonobo2-common unzip texi2html texinfo libsdl1.2-dev docbook-utils gawk python-pysqlite2 diffstat make gcc build-essential xz-utils g++ desktop-file-utils chrpath libgl1-mesa-dev libglu1-mesa-dev autoconf automake groff libtool xterm libncurses5-dev cvs tofrodos

a) command: ls -l /bin/sh

Message: /bin/sh -> dash

b) command: sudo dpkg-reconfigure dash

Answer after password – No

Message:

Removing 'diversion of /bin/sh to /bin/sh.distrib by dash'

Adding 'diversion of /bin/sh to /bin/sh.distrib by bash'

Removing 'diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash'

Adding 'diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by bash'

c) command for checking: ls -l /bin/sh

Message: /bin/sh -> bash

mount SDK source .iso file
cd <sdk-install-dir>.
./sources/meta-freescale/scripts/host-prepare.sh

Usually Linux recommends also run the following command: sudo usr/sbin/visudo

bitbake fsl-image-minimal

See the Section 3.3.7 (Install the Standalone Toolchain) in the SDK 2.0-1703 documentation:

https://www.nxp.com/docs/en/supporting-information/QORIQ-SDK-2.0-IC-REV0.pdf

Note:

Each time you wish to use the SDK in a new shell session, you need to source the environment setup script e.g.

$ . /opt/fsl-qoriq/2.0/environment-setup-aarch64-fsl-linux

$ . /opt/fsl-qoriq/2.0/environment-setup-cortexa7hf-vfp-neon-fsl-linux-gnueabi

Check result of "source" command. Use "$PATH" command. The "source" command should add path to gcc compiler.

You should see similar message:

echo $PATH

bash: /opt/fsl-qoriq/1.9/sysroots/x86_64-fslsdk-linux/usr/bin:/opt/fsl-qoriq/1.9/sysroots/x86_64-fslsdk-linux/usr/bin/powerpc-fsl-linux-gnuspe:

$CC test.c -o test.elf // dinamic library

$CC test.c --static -o test.elf // static library

Have a great day,
Pavel Chubakov

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: QorIQ Linux SDK and ToolChain for T2080 RDB

anshulkhare — Sun, 02 Sep 2018 11:18:22 GMT

Hello Pavel Chubakov

Thank you for the support,

i have downloaded following files

QorIQ Linux SDK v2.0 SOURCE.iso

QorIQ Linux SDK v2.0 PPCE6500 Yocto Cache.iso

SDK-V2.0-1701.tar.bz2

and followed all the instructions as you suggested and mentioned in the QorIQ SDK v2.0-1703 Documentation,

it is working fine till step 5, but at step 6 when i am running bitbake command in build directory build_t2080rdb-64b

i am getting error as bitbake command not Found.

Thanks in Advance.

Re: QorIQ Linux SDK and ToolChain for T2080 RDB

liguofa — Thu, 06 Sep 2018 17:26:14 GMT

you just need is to read start here in the https://www.nxp.com/docs/en/supporting-information/QORIQ-SDK-2.0-IC-REV0.pdf file. just step by step.

Re: QorIQ Linux SDK and ToolChain for T2080 RDB

anshulkhare — Thu, 27 Sep 2018 14:15:51 GMT

Hello Li guofa

Thanks for reply,

Now Problem is solved .

topic Re: QorIQ Linux SDK and ToolChain for T2080 RDB in T-Series

QorIQ Linux SDK and ToolChain for T2080 RDB

Re: QorIQ Linux SDK and ToolChain for T2080 RDB

Re: QorIQ Linux SDK and ToolChain for T2080 RDB

Re: QorIQ Linux SDK and ToolChain for T2080 RDB

Re: QorIQ Linux SDK and ToolChain for T2080 RDB