POST-Test for T2080

anshulkhare — Fri, 24 Aug 2018 07:05:47 GMT

Hi All,

I have an T2080-RDB board,
i am a beginner for this board .

i have to perform post tests(RAM,PROM and Ethernet) on the board,

any suggestion to perform the test would be appreciated .

Re: POST-Test for T2080

yipingwang — Tue, 11 Sep 2018 07:27:23 GMT

Hello Anshul khare,

You could refer to the following configuration in include/configs/P2041RDB.h to configure post memory test.

#define CONFIG_POST CONFIG_SYS_POST_MEMORY /* test POST memory test */

#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */

#define CONFIG_SYS_MEMTEST_END 0x00400000

#define CONFIG_SYS_ALT_MEMTEST

#define CONFIG_PANIC_HANG /* do not reset board on panic */

Please refer to "Memory test" section in post/tests.c, the function memory_post_test is used to do memory test with software method, which is defined in post/drivers/memory.c.

Have a great day,
TIC

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

topic POST-Test for T2080 in T-Series

POST-Test for T2080

Re: POST-Test for T2080