T1040 Voltage Ramp

darrellblock — Thu, 30 Jun 2016 20:07:43 GMT

Customer has T1040 power-up question. They are planning on having all voltage rails come up ratiometrically (see image). This looks to be OK but they would like verification.

Re: T1040 Voltage Ramp

r8070z — Fri, 01 Jul 2016 07:11:30 GMT

Have a great day,

The T1040 data sheet available on the NXP site (link) provides the power sequencing requirements. It should be satisfied. There are 3 groups of power supplies. There is not ordering requirement with respect to one another in the same group. Groups 1,2 and 3 must be ordered sequentially such that voltage rails on a previous step must reach 90% of their value before the voltage rails on the current step reach 10% of theirs

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

T-SeriesのトピックT1040 Voltage Ramp

T1040 Voltage Ramp

Re: T1040 Voltage Ramp