“Program the NTM88 IC in auto mode using Multilink Universal.”

kreep56lores — Fri, 30 Jan 2026 05:31:57 GMT

I have multilink Universal device, NTM88H135ST1 IC and xyz.s19 executable file. I want to program my .s19 file in auto.. please suggest which support to use and process.

Re: “Program the NTM88 IC in auto mode using Multilink Universal.”

JozefKozon — Fri, 30 Jan 2026 06:10:59 GMT

Dear Kreep56lores,

P&E Multilink Universal, you are already using is the correct hardware. The Multilink fully supports S08‑based devices, which the NTM88H135ST1 is.

Please download and install PEmicro’s flash programming software for HCS08/S08 microcontrollers. You can download it from this link: https://www.pemicro.com/products/product_viewDetails.cfm?product_id=15320181

With Best Regards,

Jozef

Sensors中的主题 “Program the NTM88 IC in auto mode using Multilink Universal.”

“Program the NTM88 IC in auto mode using Multilink Universal.”

Re: “Program the NTM88 IC in auto mode using Multilink Universal.”