Sensors中的主题 Re: MPXV5010DP replace MPXV5010GP

MPXV5010DP replace MPXV5010GP

yangzhao1 — Tue, 03 Feb 2026 21:53:53 GMT

Our design use mpxv5010GP. Now because we do not have any in stock.So can we use Mpxv5010DP replace ?

And is there some different about the schematic and software ？

TomasVaverka — Wed, 20 May 2020 07:19:57 GMT

Hi,

Yes, the MPXV5010DP can easily replace the MPXV5010GP, the only difference is the package (P2 pressure port vs. vent hole at the bottom of the chip):

Best regards,

Tomas

yangzhao1 — Wed, 20 May 2020 07:58:31 GMT

As my understanding , if we use MPXV5010DP replace MPXV5010GP，we do not change schematic and PCB layout.

MPXV5010DP can use in Differential or Gauge Configurations. How to use it in Gauge Configuration?

We can only use one port as follow to in Gauge configuration?

TomasVaverka — Wed, 20 May 2020 10:33:13 GMT

Hi,

They are fully pin to pin compatible => no change in schematic/layout needed.

Yes, you will only use the P1 port, P2 port will be left open.

Best regards,

Tomas