SensorsのトピックRe: Using Kinetis TSI inputs https://community.nxp.com/t5/Sensors/Using-Kinetis-TSI-inputs/m-p/958497#M5865 <HTML><HEAD></HEAD><BODY><P>Hi</P><P>depending on the final application, but normally a 100 Ohms&nbsp; is enough&nbsp;</P><P></P><P>I hope this will help you.&nbsp;</P></BODY></HTML> Thu, 27 Jun 2019 01:16:47 GMT vicentegomez 2019-06-27T01:16:47Z Using Kinetis TSI inputs https://community.nxp.com/t5/Sensors/Using-Kinetis-TSI-inputs/m-p/958496#M5864 <HTML><HEAD></HEAD><BODY><P>I&nbsp;want to use TSI inputs on a Kinetis MCU in self-capacitive mode. Do I need in-line resistors between the pads and the inputs and if so what value?</P></BODY></HTML> Fri, 21 Jun 2019 19:25:25 GMT https://community.nxp.com/t5/Sensors/Using-Kinetis-TSI-inputs/m-p/958496#M5864 MarkPotts 2019-06-21T19:25:25Z Re: Using Kinetis TSI inputs https://community.nxp.com/t5/Sensors/Using-Kinetis-TSI-inputs/m-p/958497#M5865 <HTML><HEAD></HEAD><BODY><P>Hi</P><P>depending on the final application, but normally a 100 Ohms&nbsp; is enough&nbsp;</P><P></P><P>I hope this will help you.&nbsp;</P></BODY></HTML> Thu, 27 Jun 2019 01:16:47 GMT https://community.nxp.com/t5/Sensors/Using-Kinetis-TSI-inputs/m-p/958497#M5865 vicentegomez 2019-06-27T01:16:47Z