topic Re: TSS(Touch Sensing Software) library migration in Sensors

TSS(Touch Sensing Software) library migration

kigerzhang — Tue, 03 Feb 2026 21:20:30 GMT

Dear Expert,

Now a cold storage control project used the S12ZVC MCU . It is also required the touch sensing UI .

I want to know is there possible to migrate the TSS library to S12ZVC ?

If it can't be migrated, please recommend a industrial or automotive grade MCU. The MCU must has CAN and ADC (best if the ADC there is program gain control).

Best Regards,

Kiger

Re: TSS(Touch Sensing Software) library migration

TomasVaverka — Tue, 21 Jun 2016 08:58:05 GMT

Dear Kiger,

The TSS is no longer recommended for new designs and there are no plans to add support for S12ZVC devices. There is a new software library – the NXP Touch Software supporting most of the Kinetis MCUs. The Kinetis E series might be a good choice, but the TSI module is available only on the KE1xZ which does not have the CAN module. So I would recommend considering our standalone touch/promixity sensors which can be connected to the S12ZVC through the I²C.

I hope it helps.

Best regards,

Tomas

PS: If my answer helps to solve your question, please mark it as "Correct". Thank you.

Re: TSS(Touch Sensing Software) library migration

kigerzhang — Wed, 22 Jun 2016 01:59:08 GMT

Dear Tomas,

Thank you so much for your help!