MMA955l issue

prasannaprabhu7 — Tue, 03 Feb 2026 23:03:11 GMT

I am using MMA955l pedometer sensor in STM32l4RTC MCU, which is connected to i2c and I need to read accelerometer data from chip. I did not find any sample source and going through datasheet and looking at examples I am following command sequence as :

aTxBuffer[0] = 0x00;

aTxBuffer[1] = 0x00;

aTxBuffer[2] = 0x00;

aTxBuffer[3] = 0x0C;

MMA955L_AcclDataTx(aTxBuffer, 4); //Read ID command

//Read Pedometer ID

MMA955L_AcclDataRx(aRxBuffer, 16);

Note: I get response as :

0x00 0x80 0x0c 0x0c 0x7a 0xed 0x25 0x5d 0x01 0x01 0x02 0x02 0x01 0x06 0x03 0x41 when I read 16 bytes of data.

//command to request_to_start register configuration

aTxBuffer[0] = 0x01;

aTxBuffer[1] = 0x10;

aTxBuffer[2] = 0x00;

aTxBuffer[3] = 0x04;

MMA955L_AcclDataTx(aTxBuffer, 4);

aTxBuffer[0] = 0x01;

aTxBuffer[1] = 0x20;

aTxBuffer[2] = 0x00;

aTxBuffer[3] = 0x04;

aTxBuffer[4] = 0xAA;

aTxBuffer[5] = 0xBB;

aTxBuffer[6] = 0xCC;

aTxBuffer[7] = 0xDD;

HAL_Delay(100);

MMA955L_AcclDataTx(aTxBuffer, 8);

//Interrupt_App_IDs register configuration

aTxBuffer[0] = 0x01;

aTxBuffer[1] = 0x20;

aTxBuffer[2] = 0x0C ;

aTxBuffer[3] = 0x04;

aTxBuffer[4] = 0x06;

aTxBuffer[5] = 0x00;

aTxBuffer[6] = 0x00;

aTxBuffer[7] = 0x00;

MMA955L_AcclDataTx(aTxBuffer, 8);

//Awake accelerometer

aTxBuffer[0] = 0x12;

aTxBuffer[1] = 0x20;

aTxBuffer[2] = 0x06;

aTxBuffer[3] = 0x01;

aTxBuffer[4] = 0x00;

MMA955L_AcclDataTx(aTxBuffer, 5);

//Put accel in legacy mode

aTxBuffer[0] = 0x18;

aTxBuffer[1] = 0x20;

aTxBuffer[2] = 0x00;

aTxBuffer[3] = 0x01;

aTxBuffer[4] = 0x10;

MMA955L_AcclDataTx(aTxBuffer, 5);

//Configure accelerometer xyz data

aTxBuffer[0] = 0x4;

aTxBuffer[1] = 0x20;

aTxBuffer[2] = 0x00;

aTxBuffer[3] = 0xC;

aTxBuffer[4] = 0x06;

aTxBuffer[5] = 0x00;

aTxBuffer[6] = 0x06;

aTxBuffer[7] = 0x01;

aTxBuffer[8] = 0x06;

aTxBuffer[9] = 0x02;

aTxBuffer[10] = 0x06;

aTxBuffer[11] = 0x03;

aTxBuffer[12] = 0x06;

aTxBuffer[13] = 0x04;

aTxBuffer[14] = 0x06;

aTxBuffer[15] = 0x05;

MMA955L_AcclDataTx(aTxBuffer, 16);

//Reading aggregated data

aTxBuffer[0] = 0x12;

aTxBuffer[1] = 0x20;

aTxBuffer[2] = 0x06;

aTxBuffer[3] = 0x01;

aTxBuffer[4] = 0x00;

MMA955L_AcclDataTx(aTxBuffer, 5);

//POst this read 6 bytes data

Sensors中的主题 MMA955l issue

MMA955l issue