topic Re: 841-RDFXWIN8USB - is it compatible with Windows 10? in Sensors

841-RDFXWIN8USB - is it compatible with Windows 10?

shellyrosenfeld — Tue, 03 Feb 2026 22:18:07 GMT

841-RDFXWIN8USB - is it compatible with Windows 10?

Re: 841-RDFXWIN8USB - is it compatible with Windows 10?

michaelestanley — Wed, 16 Mar 2016 14:00:39 GMT

Shelly,

We haven't requalified against the Microsoft Windows 10 regression suite. So technically, no.

Regards,

Mike

Re: 841-RDFXWIN8USB - is it compatible with Windows 10?

shellyrosenfeld — Mon, 21 Mar 2016 14:49:09 GMT

Hi,

Thank you for your reply.

Is there a way with RDFXWIN8USB to change the sampling frequency?

The SpWin8View Demo sowtware output a log every 63mSec (15Hz).

As for the accelerometer the MMA8451Q have ODR of 1.56 to 800Hz.

Is there a way to write code and communicate with the with the MCF51Jx: ColdFire?

Thank you,

Shelly

Re: 841-RDFXWIN8USB - is it compatible with Windows 10?

michaelestanley — Mon, 21 Mar 2016 15:45:29 GMT

Shelly,

The board is compatible with Microsoft's "HID Sensor Class.

Here is the spec:

https://msdn.microsoft.com/en-us/library/windows/hardware/dn613934(v=vs.85).aspx

You can communicate with the HID sensor using the Accelerometer
class in the Windows.Devices.Sensors namespace. For example, you can change the
sample rate by setting the ReportInterval property.

https://msdn.microsoft.com/library/windows/apps/windows.devices.sensors

The RDFXWIN8USB isn't designed for general development use, but rather as a reference design for the HID interface. So we're not supplying libraries as part of our general enablement.

Mike

Re: 841-RDFXWIN8USB - is it compatible with Windows 10?

shellyrosenfeld — Tue, 22 Mar 2016 09:16:27 GMT

Thank you for the information

What is the minimum sampling interval possible?

Is there a way to interrupt the MCU code?

Thanks,

Shelly

Re: 841-RDFXWIN8USB - is it compatible with Windows 10?

michaelestanley — Tue, 22 Mar 2016 15:50:54 GMT

Shelly,

I'll have to do some research to determine the internal sampling interval.

Given the nature of your questions, I think you might want to consider a different platform: specifically our Sensor Fusion for Kinetis MCUs library (nxp.com/sensorfusion) runs on a variety of ARM-based Freedom boards available at nxp.com/freedom. Full source code is supplied, and you have total control. The Windows 8 reference design was targeted at OEMs developing Windows-based computers and tablets. The onlyY defined interface to the module is via the Windows 8 HID standard.

What is your application?

Mike