topic Re: MPX5010DP - Output wiring question in Sensors https://community.nxp.com/t5/Sensors/MPX5010DP-Output-wiring-question/m-p/426317#M1992 <HTML><HEAD></HEAD><BODY><P>Hello again.&nbsp; I have the problem sorted.&nbsp; It was basically a bad connection on the multimeter.&nbsp; The sensor is now working great.</P></BODY></HTML> Wed, 13 May 2015 19:26:34 GMT coilino_toole 2015-05-13T19:26:34Z MPX5010DP - Output wiring question https://community.nxp.com/t5/Sensors/MPX5010DP-Output-wiring-question/m-p/426316#M1991 <HTML><HEAD></HEAD><BODY><P>Hello,</P><P></P><P>I'm trying to use the MPX5010DP sensor as a water level sensor and I'm running into a difficulty.&nbsp; (This is not my area of expertise needless to say).</P><P></P><P>I have a 5V supply attached to Pin 3 (Vs) and the Ground connected to Pin 2.&nbsp; I am reading the output from Pin 1 (Vout) and Pin 2 with the multimeter and it is very obviously not responding to changes in pressure across the barbs of the sensor.&nbsp;&nbsp; I'm getting a reading of around 850mV that declines slowly over time.</P><P></P><P>What have I done wrong?&nbsp; Many thanks for any assistance.</P></BODY></HTML> Tue, 03 Feb 2026 22:50:07 GMT https://community.nxp.com/t5/Sensors/MPX5010DP-Output-wiring-question/m-p/426316#M1991 coilino_toole 2026-02-03T22:50:07Z Re: MPX5010DP - Output wiring question https://community.nxp.com/t5/Sensors/MPX5010DP-Output-wiring-question/m-p/426317#M1992 <HTML><HEAD></HEAD><BODY><P>Hello again.&nbsp; I have the problem sorted.&nbsp; It was basically a bad connection on the multimeter.&nbsp; The sensor is now working great.</P></BODY></HTML> Wed, 13 May 2015 19:26:34 GMT https://community.nxp.com/t5/Sensors/MPX5010DP-Output-wiring-question/m-p/426317#M1992 coilino_toole 2015-05-13T19:26:34Z Re: MPX5010DP - Output wiring question https://community.nxp.com/t5/Sensors/MPX5010DP-Output-wiring-question/m-p/426318#M1993 <HTML><HEAD></HEAD><BODY><P>Hi Coilin,</P><P></P><P>OK... good to know.</P><P></P><P>Regards,</P><P>Tomas</P></BODY></HTML> Thu, 14 May 2015 07:31:30 GMT https://community.nxp.com/t5/Sensors/MPX5010DP-Output-wiring-question/m-p/426318#M1993 TomasVaverka 2015-05-14T07:31:30Z