SensorsのトピックRe: build error. FRDM-K64F

build error. FRDM-K64F

youngguekim — Tue, 03 Feb 2026 21:06:11 GMT

Hi.

I am using FRDM-FXS-MULT2-B and FRDM-K64F with KDS 3.0.0

it worked very well on website all course http://www.freescale.com/products/arm-processors/kinetis-cortex-m/k-series/k6x-ethernet-mcus/freescale-freedom-development-platform-for-kinetis-k64-k63-and-k24-mcus:FRDM-K64F?tab=In-Depth_Tab

but.

I imported project FRDM K64\KDS (received library) and tried to build, debug. and error message appeared..

please help me..

Re: build error. FRDM-K64F

ZhangJennie — Wed, 23 Sep 2015 02:46:47 GMT

Hi,

I wonder the original project was made by Codewarrior but not KDS.

i suggest you check what platform the project developed with: CW10.5 or CW10.6? then download the correct CW version then test the project again.

if you want to use kds anyway, please follow attached document for porting.

can this help you?

Have a great day,
Zhang Jun

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: build error. FRDM-K64F

youngguekim — Wed, 23 Sep 2015 04:46:14 GMT

Thanks for your advice

but I want to use KDS , not CW

I downloaded "Freescale sensor fusion library for Kinetis MCUs" and import the project (KDS folder) with KDS 3.0.0

so is it right way to download flash ????

Re: build error. FRDM-K64F

a8Chcx — Wed, 23 Sep 2015 11:54:51 GMT

Hi,

Please try to clean the project and rebuild to see if it work?

Regards,

Christie

Re: build error. FRDM-K64F

michaelestanley — Wed, 23 Sep 2015 15:49:16 GMT

Younggue,

From your other posting, I can tell what the problem is. You are using Version 4.22 of the sensor fusion library, which was published almost a year ago, well before KDS3.0 existed. It's possible to import the older KDS projects, but there are one of two things that have to be done to make them work. Easier for you to download the new Version 5.00 library, which was specifically built using KDS 3.0.

Regards,

Mike

Re: build error. FRDM-K64F

youngguekim — Wed, 23 Sep 2015 23:30:53 GMT

Thank you.

I download the new version 5.00 library. and I change some debug option

it work very well !!!!

Thank you so much :smileyhappy: