Secure AuthenticationのトピックRe: I would like to use ISO7816 interface in SE050

I would like to use ISO7816 interface in SE050

masa_m — Tue, 14 Sep 2021 07:54:38 GMT

Dear NXP support team,

I would like to use ISO7816 interface in SE050.

(i) Can the following environment use ISO7816 interface?
- EdgeLock® SE050 Development Kit
- SE050C2 chip

(ii) If answer of (i) is "yes", would you tell me what document should I refer to in order to use ISO7816 interface?

Best Regards,
Masahiro Marume

Re: I would like to use ISO7816 interface in SE050

Kan_Li — Thu, 16 Sep 2021 06:00:12 GMT

Hi @masa_m ,

I am sorry, but this kind of interface is not supported in the following environment:

- EdgeLock® SE050 Development Kit
- SE050C2 chip

Only the following interfaces are available.

Hope that makes sense,

Have a great day,
Kan

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!
- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

Re: I would like to use ISO7816 interface in SE050

masa_m — Thu, 16 Sep 2021 06:30:04 GMT

Hi Kan,

Thank you for your response.
Would you tell me which environment supports ISO7816 interface?

I found the following description in SE050 datasheet
So, I thought SE050 can use ISO7816 interface.

Regards,
Masahiro Marume

Re: I would like to use ISO7816 interface in SE050

Kan_Li — Fri, 17 Sep 2021 12:11:08 GMT

Hi @masa_m ,

Actually this kind of interface is just available with some custom type of SE050. You have to contact your local NXP Marketing/sales or local FAE for further help.

Have a great day,
Kan