Secure AuthenticationのトピックRe: Establishing I2C communication between STM32 Nucleo F030 and SE050

Establishing I2C communication between STM32 Nucleo F030 and SE050

badhri_radhakri — Thu, 13 Feb 2020 10:34:43 GMT

Hey guys I'm using a STM32 Nucleo F030 board as my Host device and would like to communicate with the secure element SE050 using I2C protocol. Is there any example programs that I can go through for better understanding ? The user manual for SE05x I2C specs is the document I'm currently using. I would really appreciate if someone has any leads.

Re: Establishing I2C communication between STM32 Nucleo F030 and SE050

Kan_Li — Fri, 14 Feb 2020 02:07:30 GMT

Hi,

Yes, there is a middle ware for SE050 available, but so far this MW just supports NXP MCU&MPU products, you have to do the porting by yourself. We have a porting guide available , please refer to https://www.nxp.com/docs/en/application-note/AN12488-SE050_middleware_porting_guidelines.pdf for details.

Hope that helps,

Have a great day,
Kan

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!
- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

Re: Establishing I2C communication between STM32 Nucleo F030 and SE050

CureSaba — Fri, 28 Nov 2025 11:57:03 GMT

it seems link not working

its says not found