Read CAN-FD Using S32V234 Transceivers

christharp — Wed, 01 Aug 2018 14:37:04 GMT

Hello,

I am trying to read in CAN FD data using S32V234 CAN transceivers on BlueBox via SocketCAN.

So far, I have been able to:

However, when I try to read FD data using either CAN0 or CAN1, I run into issues.

Specifically, when I try to set the interface to FD, I receive the message "RTNETLIINK answers: Operation Not Supported".

example command -> $sudo ip link set can0 up type can bitrate 500000 dbitrate 2000000 fd on

I had seen this link, indicating a similar issue: Access CAN-FD on S32V234

Based on the response, I have read through the BSP documentation, but I don't see any specific references to FD.

Could anyone help with this?

Any help would be appreciated.

Thanks,

Chris

Re: Read CAN-FD Using S32V234 Transceivers

KushalShahNXP — Thu, 02 Aug 2018 19:44:02 GMT

Hi Chris,

We have stopped supporting this community. But we still support S32V2 question using our ticketing system.

Please create the request at www.nxp.com/support using Support Requests option. Our experts will help you.

Thank you for understanding.

Regards,

Kushal