s32k144 lin sdk example

sohyunjang — Thu, 01 Nov 2018 07:53:52 GMT

Hi, I use lin slave sdk example in S32 Design Studio for ARM v1.3

I was having trouble reading the Lin_slave.dox document in the Doxtgen folder.

I use S32K144EVB-Q100. But, What does S32K144-MB mean?

And

   PIN FUNCTION    |   S32K144EVB-Q100         |   S32K144-MB
    ----------------|---------------|--------------
    BUTTON 2 (\b PTC13) |BTN1 - wired on the board |   BTN3 - wired on the board
    BUTTON 1 (\b PTC12) |BTN0 - wired on the board |   BTN2 - wired on the board
    RED_LED (\b PTD15) |RGB_RED - wired on the board    |   J12.17 - J11.31
    GREEN_LED (\b PTD16) |RGB_GREEN - wired on the board | J12.16 - J11.30
    BLUE_LED (\b PTD16) |RGB_GREEN - wired on the board | J12.31 - J11.29
    GND       (\b GND) |J3-11 - Master GND    |J6 - Master GND
    LPUART2_RX (\b PTD6) |J5-18 - J4-6 | J12.25 - J10.17
    FTM0_CH5 (\b PTB17) |J4.6 - J5.18 | J10.17 - J12.25
    LIN (\b *)             |J11-1 - Master LIN | J48.4 - Master LIN

<b>(*) Those lines must be modulated using a transceiver, if it is not specified the boards already include the LIN transceiver</b>

What does it mean?

Re: s32k144 lin sdk example

raresvasile — Thu, 01 Nov 2018 08:42:07 GMT

Hi,

The S32K144-MB is an internal board, used for validation.

Best regards,

Rares

Re: s32k144 lin sdk example

sohyunjang — Thu, 01 Nov 2018 09:01:41 GMT

Hi,

Do I need to connect the two wires?

LPUART2_RX (\b PTD6) |J5-18 - J4-6 | J12.25 - J10.17
FTM0_CH5 (\b PTB17) |J4.6 - J5.18 | J10.17 - J12.25

Thank you.

Re: s32k144 lin sdk example

raresvasile — Thu, 01 Nov 2018 12:30:20 GMT

Hi,

Yes, you have to connect them using a cable from J5-18 - J4-6(on the board headers).

Best regards,

Rares

S32 SDKのトピックRe: s32k144 lin sdk example

s32k144 lin sdk example

Re: s32k144 lin sdk example

Re: s32k144 lin sdk example

Re: s32k144 lin sdk example