S32 SDKのトピックRe: [Lin Master] [linstack_config]middleware - BaudRate=10417 bps

[Lin Master] [linstack_config]middleware - BaudRate=10417 bps

CY9 — Tue, 01 Sep 2026 04:14:09 GMT

LIN Bus客戶要求 baud rate = 10417 bps ,

使用 LDF Explorer 亦支援 10417 baud rate :

CY9_0-1788234587344.png

但是，回到 S32DS ， LPUART2 並不支援該 baudrate :

CY9_1-1788234668862.png

現在設備無法溝通，不確定是否是 LPUART baud rate 設定造成 !?

有人能協助確認嗎？

感謝

S32K144 EVB + S32DSv3.5+RTM401

#LIN_BUS #LIN_Master #Lin_Master

danielmartynek — Tue, 01 Sep 2026 08:44:13 GMT

Hello @CY9,

Unfortunately, the driver supports these fixed baud rates only:

danielmartynek_0-1788252200254.png

Regards,

Daniel

CY9 — Tue, 01 Sep 2026 09:08:53 GMT

But my customer ask to use the strange baudrate ...

And [LDF explorer] support this strange baudrate too...

I support it's ok for this case, and promise the customer on go this case already .

So, What can I do now ?

Any comments?

Thanks for any comments ... or gossip

danielmartynek — Tue, 01 Sep 2026 11:26:42 GMT

You could consider upgrading to RTD 3.0.0, which is more flexible in the LIN Baud rate, see below.

Please note that the legacy SDK 4.0.1 that you use is no longer supported and is not recommended for new designs.

danielmartynek_0-1788261761281.png

Regards,

Daniel