topic Re: How to enable / define SDHC_DEBUG in S32 SDK

How to enable / define SDHC_DEBUG

rjoycequincy — Thu, 01 Feb 2024 13:33:43 GMT

For an MPC5748G project, I tried to enable debug in Processor Expert, as shown below.

sdhc_middleware.h looks like it does below. IE it does not clear out the 'turn off'

/*! @brief enable debug */
/* Turn on all SDHC DEBUG messages */
#include "console.h"

/* Turn off SDHC DEBUG messages */
#define SDHC_DEBUG(message)

Re: How to enable / define SDHC_DEBUG

DanNguyenDuy — Mon, 05 Feb 2024 04:07:17 GMT

Hi @rjoycequincy,

what is the package you are using?

Best regards,

Dan

Re: How to enable / define SDHC_DEBUG

rjoycequincy — Mon, 05 Feb 2024 17:35:34 GMT

I hope these are the details you are looking for .

Please note I am developing for MPC5748G only.

I am not sure how or when the S32R274 and S32R372 packages were installed,
and I think I need only care about the 3.0.3 SDK (S32 for Power Architecture). .
I inherited a previous installation and I do not know how to remove the other SDK's.

These may be redundant to the 'Installation Details': The list is long so the image capture is in two parts.

Re: How to enable / define SDHC_DEBUG

DanNguyenDuy — Fri, 08 Mar 2024 02:28:49 GMT

Hello @rjoycequincy,

At the moment, my computer has some problems and I can't install 3.0.3 package to check your issue.

Could you zip the S32_SDK_S32PA_RTM_3.0.3 package at the path "C:\NXP\S32DS_Power_v2.1\S32DS\software" and send it to me?

Best regards,

Dan

Re: How to enable / define SDHC_DEBUG

rjoycequincy — Fri, 08 Mar 2024 03:12:59 GMT

Zip file is 665 MBytes. Limit for atttachments says 25Mbytes.

Please advise

Re: How to enable / define SDHC_DEBUG

DanNguyenDuy — Fri, 08 Mar 2024 11:49:01 GMT

Hello @rjoycequincy,

I installed the 3.0.3 package successful on S32DS PowerPC.

The SDHC_DEBUG(message) will be replaced by NULL statement as this definition. And this is meaning of comment "Turn off SDHC DEBUG messages".

Best regards,

Dan