ADC trigger interrupt s32K144

IuliaB — Mon, 26 Sep 2022 08:10:06 GMT

Hello! Im trying to configure ADC trigger interrupt for my board but I dont understand

S32_NVIC->ICPR[1] = 1 << (39 % 32); /* Register ADC0 interrupt */

S32_NVIC->ISER[1] = 1 << (39 % 32); /* Enable ADC0 interrupt */

S32_NVIC->IP[39] = 0xA0; /* priority is 10 */

Why do we use those number value or what do they represent to set there?

Re: ADC trigger interrupt s32K144

Robin_Shen — Tue, 27 Sep 2022 04:44:09 GMT

Hi IuliaB,

Please refer to the "7.2.3 Determining the bitfield and register location for configuring a particular interrupt" of S32K1xx MCU Family - Reference Manual

Determining the bitfield and register location for configuring a particular interrupt.png

Best Regards,
Robin
-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

topic ADC trigger interrupt s32K144 in S32 SDK

ADC trigger interrupt s32K144

Re: ADC trigger interrupt s32K144