topic Re: Generated files are referring headers from SDK in installing folder. in S32 Design Studio

Generated files are referring headers from SDK in installing folder.

tejo2one — Thu, 02 Mar 2023 06:43:56 GMT

I am using MPC5748G development kit with S32DS., new project is created by selecting create from example the generated files are referring header files from installing folder instead of project folder.

Any changes made to project folder are not being reflected to project instead header files in installing location are being reflected to project.

As a work around header included as following:

tejo2one_0-1677739401547.png

Please let me know if there is permanent solution.

Re: Generated files are referring headers from SDK in installing folder.

jiri_kral — Thu, 02 Mar 2023 09:45:29 GMT

Hi,

you may find helpful this thread - https://community.nxp.com/t5/S32-Design-Studio-Knowledge-Base/HOWTO-Use-SDK-based-example-code-as-standalone-usable-for-GIT/ta-p/1108204

Re: Generated files are referring headers from SDK in installing folder.

tejo2one — Sun, 05 Mar 2023 10:20:50 GMT

Thanks for response, page is no longer available.

Can you please check & reshare?

tejo2one_0-1678011623989.png

Re: Generated files are referring headers from SDK in installing folder.

Markus_Schroeder — Mon, 06 Mar 2023 07:03:21 GMT

I found the updated link:

https://community.nxp.com/t5/S32-Design-Studio-Knowledge-Base/HOWTO-Use-SDK-based-example-code-as-standalone-usable-for-GIT/ta-p/1108204

Actually, it seems, the link was correct, only the 4 at the end was not interpreted as part of it.

Re: Generated files are referring headers from SDK in installing folder.

tejo2one — Mon, 06 Mar 2023 15:50:08 GMT

Thanks for response. I did little search and found it.

.PE file already contained generate mode as "standalone".

I just removed include paths which were pointing to "c-drive" in "properties/Paths and Symbols/Includes".

After update:

tejo2one_0-1678117791185.png