S32 Design Studio中的主题 Re: Error in services launch sequence. PEmicro GDB Launch Failure

Error in services launch sequence. PEmicro GDB Launch Failure

myna — Thu, 04 Apr 2019 09:29:52 GMT

Hello.

When downloading s32k118EBV sample code, the following error occurs.

Error in services launch sequence
PEmicro GDB Launch Failure : Could not bind socket. Address and port are already in use. Another GDB Server debug session may be using the same Server Port number. To run simultaneous debug sessions, please specify a unique Server Port and GDBMI Port in the Debug Configuration for each project. If another session is not running simultaneously, make sure that the chosen port is available and that pegdbserver_console and the arm-none-eabi-gdb processes have terminated.

Please check attached capture file.

How can I solve this problem???

Re: Error in services launch sequence. PEmicro GDB Launch Failure

jiri_kral — Thu, 04 Apr 2019 10:07:20 GMT

Hi,

check if there is no another pegdbserver_console instance running in Windows task manager (CTRL+SHIFT+ESC). If yes - end the task.

Jiri

Re: Error in services launch sequence. PEmicro GDB Launch Failure

myna — Thu, 04 Apr 2019 10:22:09 GMT

I've already checked, but there is no running pegdbserver_console.

Is there any other solution?

Re: Error in services launch sequence. PEmicro GDB Launch Failure

jiri_kral — Thu, 04 Apr 2019 10:36:36 GMT

You can check if any other application isn't using gdb server's port. You can use windows commandline> netstat -a -b

Assuming that restart of your PC machine also doesn't help, correct?

Jiri

Re: Error in services launch sequence. PEmicro GDB Launch Failure

myna — Fri, 05 Apr 2019 01:54:08 GMT

I did check netstat, it was already using the gdb port elsewhere.

So, I did change GDB Server port Number in Debug Configuration--> GDB Server Settings

Eventually, the problem was solved.

Thank you.

myna

Re: Error in services launch sequence. PEmicro GDB Launch Failure

yangjinzhuang — Fri, 16 Dec 2022 01:40:28 GMT

What GDB server port number should I set for the two cores?