topic Re: Command Line Interface for IVT in S32 Design Studio

Command Line Interface for IVT

pawansinghrana — Mon, 19 Sep 2022 09:59:51 GMT

Hello NXP ,

I would like to ask How can I use the Command Line Interface to Create the Blob Image from DS IVT Tool.

I tried following command, The command just open the Design Studio Tool and does nothing?

*/==================================

s32ds.exe -noSplash \

-application com.nxp.swtools.framework.application \

--launcher.ini C:\NXP\S32DS.3.4\eclipse\s32ds.ini \

-consoleLog -noExit \

-HeadlessTool IVT \

-ExportAB ..\..\Output\build_targets\SMU\main_smu_Appl.bin \

-start_pointer_addr 0x25000000 \

-entry_pointer_addr 0x25000000 \

-raw_binary ..\..\Output\build_targets\SMU\main_smu.bin

-ValidateConfiguration \

=======================================/*

Re: Command Line Interface for IVT

pavla_hajna — Mon, 19 Sep 2022 11:10:42 GMT

Hello Pawan Singh Rana,

please refer to following How To instructions:

https://community.nxp.com/t5/S32-Design-Studio-Knowledge-Base/HOWTO-Use-IVT-Tool-To-Create-A-Blob-Image/ta-p/1108863

Have a nice day

Best regards

Pavla

Re: Command Line Interface for IVT

pawansinghrana — Mon, 19 Sep 2022 11:39:18 GMT

Hello Palva,

Thanks for the Info,

I dont have any issues creating IVT from the Design Studio using GUI.

I am having issues if i use command line Interface as mentioned in my Initial Comment.

Thanks

Re: Command Line Interface for IVT

pavla_hajna — Tue, 20 Sep 2022 14:05:11 GMT

hello Pawan,

The command line instructions for all of the S32 Configuration Tools which support that are detailed within the S32 Configuration Tools Getting Started. You can locate it by: Help -> Help Contents, then look for the section shown here:

This image is taken from the S32 Design Studio v3.5.

Have a nice day

Pavla