S32 Design StudioのトピックS32 Debug Probe JTAG20 doesnt work

S32 Debug Probe JTAG20 doesnt work

1004755883 — Fri, 17 Jun 2022 02:07:01 GMT

I have bought a S32 Debug Probe ,but I can't conenect to the s32G evb boad. When I borrow a new JTAG20 board like this .I can connect to the S32G board.

So it must be a damge board: id 700-27318 REV A.How to repaire it?Can you provide the schematic diagram? Or send one of these adapters separately,thank you!

doesn"t work

Re: S32 Debug Probe JTAG20 doesnt work

Bio_TICFSL — Mon, 20 Jun 2022 13:48:17 GMT

Hi,

Make sure the S32 Debug Probe probe is receiving power. See LEDs on S32 Debug Probe topic for a description of the status LEDs. https://www.nxp.com/docs/en/user-guide/S32DBGUG.pdf#%5B%7B%22num%22%3A56%2C%22gen%22%3A0%7D%2C%7B%22name%22%3A%22XYZ%22%7D%2C45%2C554%2C0%5D

\
• Make sure the S32 Debug Probe is running the OS software. For more information on loading the OS software, see https://www.nxp.com/docs/en/user-guide/S32DBGUG.pdf#%5B%7B%22num%22%3A101%2C%22gen%22%3A0%7D%2C%7B%22name%22%3A%22XYZ%22%7D%2C63%2C740%2C0%5D

Regards

Re: S32 Debug Probe JTAG20 doesnt work

1004755883 — Sat, 25 Jun 2022 05:30:42 GMT

Thank you,The run/pause light does't light,The pin30 and pin29 doesn't connect any pin.

I try to connect pin30 an pin 29 to boad VCC,it always light,but can't connect to board.

So I want to find the 20pin to 30pin conennt