S32 Design Studio中的主题 S32K344 Fee using internal flash?

S32K344 Fee using internal flash?

ola_gook — Thu, 14 Apr 2022 15:49:26 GMT

I am evaluating whether S32K344 is able to emulate FEE using internal flash.

The S32DS FEE example uses external flash via QSPI only.

My company is considering using different MCUs for different purposes, but all will need some kind of NVM like FEE.

Thus, since S32K312 does not have QSPI, I can only assume that it also does not support FEE?

Correct?

Otherwize please point me to an example of using FEE based on internal FLS setup.

Regards.

Re: S32K344 Fee using internal flash?

cuongnguyenphu — Mon, 18 Apr 2022 02:53:06 GMT

Hi @ola_gook
Can you let me know which NXP SW product version you're working on S32K344

Re: S32K344 Fee using internal flash?

cuongnguyenphu — Mon, 18 Apr 2022 08:41:25 GMT

@ola_gook ,
S32K344 allows to use internal flash for Fee. As User manual of Fls module in Release RTD AUTOSAR Ver 1.0.0:

So, it's possible to use FEE with internal Flash.

For Fee example for S32K3, you can update your S32DS SW to latest version, which is installed S32K3XX development package and S32K3 RTD Autosar 4.4 includes:

Then you can find Fee example for S32K344 and S32K312 included

Please note that select Fls channel is FLS Hardware channel is 'FLS_CH_INTERN' to use internal flash config

Later, in configuration of FEE module, select the corresponding Fls sector defined previously in Fls

Re: S32K344 Fee using internal flash?

ola_gook — Mon, 18 Apr 2022 08:58:08 GMT

Thanks for the response.

So then I suppose S32K312 also has the internal flash FEE feature?

(What puzzled me was the fact that there was an external flash driver defined at the end. I didn't pay enough attention to the FLS_CH_INTERN pointer.)

Regards

/Ola

Re: S32K344 Fee using internal flash?

cuongnguyenphu — Mon, 18 Apr 2022 10:41:04 GMT

Yes, It's correct. Because FEE refer to Fls HW config, which is allowed internal flash. In this case both S32K344 and S32K312 can refer Fls Internal flash setup