topic Re: S32G2: S32DS: Cannot open the Configuration Tool in S32 Design Studio

S32G2: S32DS: Cannot open the Configuration Tool

Keita_Nagashima — Tue, 15 Mar 2022 03:20:36 GMT

Hi Sir or Madam,

I installed necessary packages into S32DS, and imported some example projects.

Some projects can be installed into my environment, but the .mek file for Configuration Tool cannot be opened.

This issue appears to depend on PlatformSDK version, but I couldn't understand the version dependence.

Would you tell me the how to solve this issue?

I would also like to know about the Version dependency with PlatformSDK.

Best Regards,

Keita

Re: S32G2: S32DS: Cannot open the Configuration Tool

mikedoidge — Tue, 15 Mar 2022 19:27:22 GMT

Hello Keita,

It seems this project is quite old and was created for the RTD which was released in December 2020. I suggest you use the new version which was included in the updated RTD you installed.

Best Regards,

Mike

Re: S32G2: S32DS: Cannot open the Configuration Tool

Keita_Nagashima — Wed, 16 Mar 2022 00:26:45 GMT

@mikedoidge ,

Thank you for your reply. I understood it.

BTW, do you know how to delete the old project like December 2020 version?

I'd like to manage the all project.

Best Regards,

Keita

Re: S32G2: S32DS: Cannot open the Configuration Tool

mikedoidge — Wed, 16 Mar 2022 15:30:08 GMT

Hello Keita,

To remove the old examples, you would need to uninstall the old RTD. Probably it is the 2.0.0 version.

Re: S32G2: S32DS: Cannot open the Configuration Tool

Keita_Nagashima — Thu, 17 Mar 2022 00:41:53 GMT

Hi @mikedoidge ,

Thank you for your reply.

Please refer to the figure in my original message. I have already deleted the old RTD and my environment was not seen it.

But, the old version of the sample programs are still there...

Best Regards,

Keita

Re: S32G2: S32DS: Cannot open the Configuration Tool

mikedoidge — Fri, 18 Mar 2022 21:45:28 GMT

If the old version of the RTD was uninstalled from S32 Design Studio, then the associated example projects should be removed as part of that process.

Perhaps check the following directories to see if some content from the old RTD is left behind:

C:\NXP\S32DS.3.4\S32DS\integration

C:\NXP\S32DS.3.4\S32DS\software

Best Regards,

Mike

Re: S32G2: S32DS: Cannot open the Configuration Tool

Keita_Nagashima — Wed, 23 Mar 2022 02:23:13 GMT

Hi @mikedoidge ,

Sorry for my delay response.

Yes, I was able to remove old sample codes by deleting the old files manually.

Best Regards,

Keita