topic Re: Where to define External Tools project dependent variables in S32 Design Studio

Where to define External Tools project dependent variables

roy_vanlierop — Mon, 27 Sep 2021 14:02:32 GMT

I'm using the external tools option of the S32 Design Studio to call Segger's Ozone debugger. A lot of variables are available out of the box. The current debug configuration is not one of those.

I want to reference the:

Project Device
Project Debug configuration

This is impossible with the available variables and I wish to put them into custom project-variables. There are however at least 8 places in the whole IDE where I can substitute strings. Which one do I need?

Re: Where to define External Tools project dependent variables

jiri_kral — Tue, 28 Sep 2021 17:38:31 GMT

Hi,

the current configuration is in ${ConfigName} variable. But I'm afraid, that MCU type is not available in any variable. Anyway - you can add your own variable in project Properties:

Re: Where to define External Tools project dependent variables

roy_vanlierop — Thu, 30 Sep 2021 15:40:47 GMT

Hello,

The ConfigName variable doesn't seem to exist in the external tools configuration pane.

The other variables are easy to reference as intended.

Re: Where to define External Tools project dependent variables

jiri_kral — Mon, 04 Oct 2021 08:58:49 GMT

Hi,

you can check the variable name in project properties. On my machine I have also config_name:

Jiri

Re: Where to define External Tools project dependent variables

roy_vanlierop — Mon, 04 Oct 2021 09:13:55 GMT

Hello Jiri,

My project properties window looks exactly the same as yours. Having the variable visible in this pane does however not result in it being usable in the external tools config.

You can try it yourself, use those two highlighted variables in the external tools. If you get those to work I will nuke the IDE and re-install it from scratch. It's easy to test since the "Show Command Line" button has been implemented.

With regards,

Roy

Re: Where to define External Tools project dependent variables

jiri_kral — Mon, 04 Oct 2021 15:44:24 GMT

Hi Roy,

well, give me a chance test it on my side. Actually - I just assume that if the variable exists - it must be usable across system. I'll let you know tomorrow. Anyway - thanks for exploring such stuff!

Jiri

Re: Where to define External Tools project dependent variables

jiri_kral — Tue, 05 Oct 2021 10:28:46 GMT

Hi Roy,

I figured out that only some subset of variables are visible for External Tools. You can choose available variables from list. The config name is under ${config_name}:

Re: Where to define External Tools project dependent variables

roy_vanlierop — Fri, 08 Oct 2021 07:41:20 GMT

Hello Jiri,

Did you actually try using the variable after that? If I try to use the config_name variable it doesn't seem to parse the variable correctly. See the below screenshots.

My External Tools view with variablesShow command line with config_name

Without config_name

Not all variables in the external tools variable list seem to be functional.