S32 Design Studio中的主题 Compiling and Launching failed

Compiling and Launching failed

at21 — Wed, 09 Jun 2021 11:04:55 GMT

while compiling I am getting make not find in path.

but when I use CDT builder it works with some warning but not error.

Same for FSL and GNU maker it is not compiling

for launching also it showing launching failed error

Re: Compiling and Launching failed

jiri_kral — Wed, 09 Jun 2021 13:18:38 GMT

Hi,

can you please share more details? What is your target MCU and S32DS Version?

For correct build you need S32DS Application Project

It is possible that you created C/C++ project. For debugging is best option Debug Configurations and choose your debugger and start debug session.

Jiri

Re: Compiling and Launching failed

at21 — Wed, 09 Jun 2021 15:45:10 GMT

Version: 2018.R1
Build id: 180326

Re: Compiling and Launching failed

at21 — Wed, 09 Jun 2021 15:49:46 GMT

My target MCU is S32K144

Since I am importing already created project..

Re: Compiling and Launching failed

at21 — Wed, 09 Jun 2021 16:09:17 GMT

always I am getting permission denied error.. I am loosing hope to solve this error .. Please help

Re: Compiling and Launching failed

jiri_kral — Wed, 09 Jun 2021 16:14:14 GMT

Hi,

It is possible share your project? What kind of project it is - did you created it from scratch or you are opening some older one?

Jiri

Re: Compiling and Launching failed

at21 — Fri, 11 Jun 2021 04:37:24 GMT

I am importing the existing project.

Now.. I tried compiling. Using miscellaneous options in C/C++ build I am using --save-temps option.. It compiled successfully.

But processor expert code generator is not working to set pin configuration.

Re: Compiling and Launching failed

jiri_kral — Fri, 11 Jun 2021 08:02:08 GMT

Hi,

When you import the project - are there some warning messages - like Some version of SDK is not available? Such type of issues are mainly caused by importing project based on older SDK.

Jiri

Re: Compiling and Launching failed

at21 — Fri, 11 Jun 2021 09:24:04 GMT

Now I am trying to update the software..

But it stucks at 80% for a long long time.

Please help @jiri_kral