S32 Design StudioのトピックSBC UJA113 driver missing from Components window (S32DS 3.4 Platform)

SBC UJA113 driver missing from Components window (S32DS 3.4 Platform)

andrei_geoorge — Mon, 10 May 2021 12:35:12 GMT

I am using S32DS 3.4 Platform for a project.

I can find the sbc_uja116x_driver in the Components window (Middleware), but the sbc_uja113 is missing.

I have found the sbc_uja113 driver in the Components window of the S32DS 2.2 ARM version, but I must use 3.4 Platform version.

Can I manually add the sbc_uja113 driver in the Components library of S32DS 3.4 Platform IDE?

I need to use the Middleware configuration window to configure and generate code for UJA113x SBC driver as in the picture below:

Thank you in advance!

Have a nice day!

Re: SBC UJA113 driver missing from Components window (S32DS 3.4 Platform)

lukaszadrapa — Thu, 13 May 2021 16:08:58 GMT

Hi Andrei,

the files are present in the SDK:

However, if you take a look at the user manual (for example c:\NXP\S32DS.3.4\S32DS\software\S32SDK_S32K1XX_RTM_4.0.1\doc\S32SDK_S32K144_UserManual.pdf), you will find this explanation why there's only low level API and why there's no standard driver with GUI initialization:

Regards,

Lukas

Re: SBC UJA113 driver missing from Components window (S32DS 3.4 Platform)

andrei_geoorge — Mon, 17 May 2021 05:24:08 GMT

Thank you very much!

Have a nice day!