topic Re: To build and run the IPCF Sample program (S32 IPCF 1.1.0 D2012) on S32DS (Ver: 3.3,Build id: 200 in S32 Design Studio

To build and run the IPCF Sample program (S32 IPCF 1.1.0 D2012) on S32DS (Ver: 3.3,Build id: 2006)

_manoj_kumar — Tue, 02 Mar 2021 05:25:39 GMT

Hello Team,

Customer facing below errors in S32 DS 3.3, pls advice:

Error: Processor 'S32G274A' detected in Design Studio GCC project does not match with currently selected `S32G274A_Rev2`.

Level: Error
Type: Tool problem
Tool: McuConfiguration
Origin: IPCF_Example_S32G274
Resource: Processor
Information: -

If they switch to S32G274A, then there are attached build errors

Please find more details.

Design Studio : Version: 3.3,Build id: 200610

RTD Version : SW32G2_RTD_4.4_0.9.0

IPCF Sample program (S32 IPCF 1.1.0 D2012

Documents Referred: IPCF Shared Memory Driver User Manual Version 1.4

They are observing issues in S32 Design Studio. They are unable to select appropriate hardware to configure.

Once the IPCF example project is imported in DS, there is a mismatch BGA observed.

Even if they choose S32G2745A_525bga the tool does not support selected processor.

Please let me know if you need any other details to be checked with them

Thanks

Re: To build and run the IPCF Sample program (S32 IPCF 1.1.0 D2012) on S32DS (Ver: 3.3,Build id: 200

jiri_kral — Mon, 01 Mar 2021 11:48:47 GMT

Hi,

please attach pictures with higher resolution. Attached ones are too small and unreadable. Thanks.

Jiri

Re: To build and run the IPCF Sample program (S32 IPCF 1.1.0 D2012) on S32DS (Ver: 3.3,Build id: 200

_manoj_kumar — Tue, 02 Mar 2021 05:27:16 GMT

Hi,

I have attached the error snapshots. Please let me know if you need any other details.

Thanks.

Re: To build and run the IPCF Sample program (S32 IPCF 1.1.0 D2012) on S32DS (Ver: 3.3,Build id: 200

mikedoidge — Thu, 11 Mar 2021 22:25:32 GMT

Hello @_manoj_kumar ,

It's possible some package or update is not installed. Could you please go to S32DS Extensions and Updates menu and click on 'Installation Details' link at upper right. Then send the details of the installed packages.

Thanks,

Mike

Re: To build and run the IPCF Sample program (S32 IPCF 1.1.0 D2012) on S32DS (Ver: 3.3,Build id: 200

_manoj_kumar — Fri, 12 Mar 2021 09:43:22 GMT

Hello Mr. Mike,

The solution for this issue was provided. Please find the link below.

https://community.nxp.com/t5/Vehicle-Control-and-Networking/To-build-and-run-the-IPCF-Sample-program-S32-IPCF-1-1-0-D2012-on/m-p/1239743#M4506

Thanks.